ELEGOO Mercury UV Curing Machine with Light Driven Rotary Base UV Curing Box Resin Curing Station for LCD SLA DLP 3D Resin Printed Model

Very easy to use. Just put the print after you wash and clean it onto the turn table , put the case on over the turntable plug in and press + for 10-30 second intervals. It cures really well. Better than you would think. Definitely makes it that much easier when it comes to your resin printing needs

I use this to cure my 3D prints at my dental office. Works well. It is a little small so you wont be able to place a lot in there at one time but for what I do it works well.

Works just like it is supposed to. Two strips of UV lights on the inside with a light activated turntable and mirrors ensures every angle of your print gets cured. Times only increase or decrease by 30 seconds which is fine cause you can either unplug the machine or remove the print.

As I said, it work great.

This curing station works very well. It has setting for the time, and a table that rotates from the UV light. The instructions are clear, and gives general guidelines on how long to cure your prints. The one issue I have is that it doesn't have a switch to turn the light off. You have to pull the connection out a bit to shut it off completely.

Cures prints fast, done in 10min or less. I had a bad bach of resin in a tank, I dumped it into a cup (about 1/3rd a cup) and stuck it in to the machine to harden it to throw out and it done in seconds.

Works well at curing resin prints. No complaints.

My son is very pleased