Waring 028538 Drive Coupling for Xtreme Series, black

First - this part worked perfectly, my (expensive) blender is now working great again. Second, as others have said, this was a major pain to replace. Here's how I did it: Note the coupling actually has two metal parts encased in a hard rubber/plastic. The metal toothed part that engages the pitcher is separate from the metal bushing that threads onto the motor. Mine was slipping around the bushing that threads onto the motor, so there was no way to easily remove the old part. 1. Cut 4 cuts with a hacksaw through the upper rubber part, next to the metal part that engages the pitcher. 2. Break all of the rubber/plastic apart, leaving only the metal bushing threaded onto the motor. There is now no way to easily get to the metal bushing. 3. Disassemble the whole blender. Remove the feet, the blender bottom case, a plastic insert, pull the circuit board out of the plastic insert. Disconnect the black and blue wires from the motor to the circuit board (mark on the board which one goes where). Then the motor can be removed. 4. Remove the top metal plate from the motor. 5. Now you can put vise grips on the busing, and (carefully) hold the fan on the other end of the motor to remove the bushing. It comes off counter-clockwise, like a regular bolt. 6. Put the whole thing back together. I used anti-seize on the motor threads before installing the new coupling, then sealed the top with a dab of silicone so liquids don't get down in the threads.

excelente tiempo denetrega

Blender works like brand new again. Very difficult to take the old coupler off.

it works

Excelente