Full Face Respirаtor Reusable, Gas Cover Organic Vapor Respirаtor, Compatible with P100 Filter, Protection for Painting, Machine Polishing, Welding, Same as 6000 7800 FF-400 6000DIN V-Series

Extremely good value, especially with the included 2 pairs of filters (4 individual filters). However, the included filters don't really get to 99% filtration, and more around 80-95% since I do detect scents that I do not want to smell (farts used as testing medium). I did put 5 stars on everything due to the value this provides (and it actually is comfortable and easily adjustable), since other manufacturers sell the full face respirators for $120+ AND WITHOUT ANY FILTERS (filters sold separately scam). If you do want that 99% filtration (which I need for soldering and other toxic fumes), go with the 3M 60923/60926 filters and you will be set. The included filters would pretty much be for known non-toxic fumes and dust filtration, which I am probably going to put on the half face respirator that I have. The only downside I have with the mask is that it's non-symmetrical in that the filters are off by like 30 degrees from each other, as you can see in Danyelle's pictures. I have tried 2 times to get them to be symmetrical, but it's impossible due to the key arrangement on the mask unless you want to compromise the seal.Unfortunately due to the COVID, the prices for the 3M filters are stuck at around $22-30 opposed to when there were about $17 per pair in 2018-2019. However if you get this for $46, 1 pair of 3M 60923 for $24, it comes out to $70, maybe $78 with tax, which still beats out $120+ without filters by a long shot. Don't buy extra filters cause they expire even when unopened (due to degradable organic materials inside the filters), so only buy when needed.

This was easy to put together and put on. I usually wear a high bun and this fit perfectly over my hair. The seal on this was perfect. I was able to breathe without any fog and didn't get that feeling of suffocating like I do with a regular face mask.

So I actually ordered this respirator thingy for two reasons. First reason is is before we stick it in our “zombie apocalypse prep box” we will need to use it to paint a few of the rooms in the house and I would rather avoid getting high or sick from the fumes. We just moved in and the place really could use a fresh coat of paint.And the second reason is so that we can have something in our “end of the world” bin with the rest of our “apocalypse emergency supplies”... you know... in case of zombies and such! It's not ideal or "military grade" but it'll do for until we upgrade for something better.The mask itself seems to be everything you could possibly need/ask for without any unnecessary junk or gimmicks. I tried it on and it seems pretty easy to put on and to operate. It is very good quality, well made and sturdy piece and it is comfy enough even for me to tolerate it.Overall, we are pretty happy with this purchase and would definitely recommend it to others.

I needed to get down into the crawl space of my 1955 home. I'm not sure what's down there so I wanted total protection. I planned to get some 3M p100 filters so really I just needed any mask that's airtight. I didn't want to break the bank on just the respirator (Home Depot wanted $100-$140 for a similar mask). I searched and searched on Amazon but every decently priced mask had terrible reviews or took months to get here. Finally I stumbled upon this mask and decided to take a chance. It had good reviews and I appreciated the compatibility with a wide range of filters. When it arrived I was pleasently surprised by the quality. Feels sturdy and the straps aren't flimsy. I appreciated all the details. It had a protective film over the screen to prevent scratches in shipping. It came with everything pictured plus a nice little bag to keep everything together. Because the breathing piece is separated, it hasn't fogged up on me. The seal is airtight (I put it on, covered the filters with my hands and breathed in. It created a vaccum and no air came in). Comfortable to wear for quite awhile. All in all I am very happy with this mask and will buy again.

This mask really is a unbelievable deal. Its worth every penny of the 45$ i paid. It works great. Looks similar to that high dollar name brand one. It even uses the high end brand name filters! Ive tried so many knock off full face respirators and this is the only one i would actually reorder! The following day after receiving this one i noticed the shape of it is exactly the same as the “6800”. So i ordered the lens covers for the 6800 and low and behold they fit exactly! The straps work very well too and easily keep a good seal on my face. Then when its time to take off, its as simple as flipping 2 clipS and it loosens right up. I would definitely recommend this to anyone. You wont be disappointed! Ps. I use this for polishing stainless steel with a polisher and airway buff wheels and solid compounds.

I tried this mask on three separate occasions, trying to force it to fit and not leak. Never succeeded. All you need to do, and all you MUST DO, Is perform the air tight leak test by plugging the filter cartridge sockets on the mast with your palms and breathing in deeply. IF AIR STILL COMES IN, IT’S NOT AN INTEGRAL SEAL AND IS DANGEROUS.I frankly cannot believe all of these other reviews with 5 stars that state that they can “still smell bleach” and or chemicals with the mask on …. If that is the case then the fundamental point of a mask has been defeated and you are at high risk.Now don’t get me wrong, 3M charging $130 for a full mask alone with not even test cartridge set, is completely heinous… but if your health is at risk to save $80 .. then IMO it’s simply not worth it. (Unless you find your own life worthless.)Unfortunately, sometimes you really do get what you pay for!!!

I prepped everything for doing my asbestos removal (abatement) in our home. I suited up and after a few hours came out for a break. Tried to re-suit up to go back into house and the side clip snapped. The silicone simply snapped. I had to tape it onto my face!! Terribly disappointing for something that is supposed to be life saving. Should last longer than 2 uses and 1 day of work!! Waste of money!!

Crappy.... not worth the money, cracked in 3 days.

Excelente mascara, se adapta perfecto, los cartuchos 3m quedan excelenteno se empaña,las correas funcionan perfectamente.Excelente precio.Si estas buscando una mascara completa esta es la opcion.

This mask is really not that bad, however, there are a few issues that should be identified. Firstly, the mask is made of a nice soft silicon that easily fits your face and with straps that easily adjust, however, they do not stay tight long and will slip. The small nibs on the strap need to be a bit bigger. Secondly, the cup that goes over your mouth and nose doe not seal, it is interfered with by the chin cup of the outer part of the mask. This results in your breath escaping and fogging the inside of the mask. Is very annoying. Thirdly, the transparent plastic is deformed where you look. I tried to capture the slight deformation in the glass with the third picture. The widow ledge is got a blurriness to it if you look. Lastly, the box says the mask prevents shock, UV, gas, and is self-priming. I am not sure how it does all these things, but I'm pretty sure the only way it will prevent shock is that you don't bump into a live wire with your face! The glass is not UV protective glass, its just plastic. The filters are only dust filters and will not prevent you from inhaling gas that could easily pass through the filters, buy a filter for that, besides I would not trust this mast to keep toxic gas out. Good for dust. Oh, and what is self-priming gas mask? Got me there! My recommendation, good price for a dusty area you are working in. I would probably use it for spray painting, but in a well ventilated system, and with different filters than what is provided. I had no issues with the seller, and the package came quickly. Glad I can help.

I am pretty happy with this product overall, they sent four filters and several filter-pads, and the quality of the product is good. - However, I noticed on inspecting it that on the silicone part of the mask that makes a seal with your face, there are two small holes that go all the way though. I’m glad to have inspected the mask before using it, because in a situation where gasses are present I’m unsure if it would affect my safety. I don’t want to wait to receive a new one, so I’m patching it myself with a pool repair kit on the inside of the silicone where it doesn’t touch my face. I’d recommend this product, it’s great for the price, but I’d make sure you thoroughly inspect it before you put it to use in the presence of gasses.