SUNLUPLA Filament Bundle 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm,1kg Spool, 10 Rolls, Black+White+Grey+Transparent+Blue+Green+Orange+Red+Pureyellow+Cyan

Prints well with standard settings on my Ender 3. Seems like a a strong filament.

this has been a good filament for me.. just starting out 3d printing and I had little issue using. Only ones that i have had is probable my fault. the spool winding was tangled and was not able to feed more filament. and i had to get a dryer since area i am setup in has a bit of moisture.

I have ordered 10 rolls + about 5 on amazon different colors. This stuff has not failed me yet. Prints easy , Sticks to the bed like mad. I don't really have any complaints besides one of my purple rolls , the filament was feeding bent but that was on one roll. Not sure if it was from shipping damage or not. I have to run around 230c , 70 first layer bed then have it drop to 65c. I am also drying them out before using them.Overall Great Filament. Love the ClipCon: I have noticed the price is starting to go up getting near the more premium brands. If its too close I will probably switch.

Filament printed beautifully and wood color was exactly what I wanted. The only thing preventing me from giving it 5 stars was the quality of the spools. First off the plastic is very thin (about half the thickness of my other brand spools) and would definitely shatter if dropped. Feels like I could break off the spool walls with two fingers. Lastly, the filament starting point sticks out of the inside of the hub (there is no recessed space between the hub and the spool walls) and creates snag or bump as the spool unwinds on the spool holder. I remedied this by snipping the end of the filament flush with the hub. Just hope it doesn't unwind itself when I get near the end. Would still by again despite the spool quality.

Great quality for the price, I have not had any issues with it being tangled and it prints great in my bambu lab printer

Shipped fast and has a plastic spool which is great for ams.

I wanted a transparent green for a "little mermaid" diorama, and this fit the bill perfectly. The bed adhesion was perfect, and it printed without any issues. I'm very pleased.

I bought this for two reasons..the colors and the name. I was told Sunlu was a good brand. I'm new to 3D printing...and started off with a different brand that made flawless prints. Then I tried some silks that were amazing. I bought this package of 10 Sunlu colors and was excited to use them. I started with the yellow last night and it was nothing but problems. It does not like to print at their recommended heat setting. At their recommended heat setting the filament just drips out of my hot end on it's own. I was having problems with it not sticking, dripping out of the hot end, globbing, lifting, stringing and then the string catching on the hot end and pulling up whatever was stuck to the string. Then, when I preheated to 205, then lowered the temp to 200 and set the bed to 61 it worked better.There seems to be random adhesion problems with the first layer, but I noticed it didn't seem to affect the finished piece...I wasn't sure if I want to continue to try and work with this or just send it back.... but after tinkering with the heat settings, it's working. Just do some heat test prints or a temperature tower before jumping into your project to save yourself time and the headache...Update1/7/24I'm done...I have wasted HOURS trying to print with the red. Yellow was OK after some hassle.. blue seems OK, I haven't used the others...but....the red has been nothing but a nightmare. It has broken off every single time..mid print. I've dried it, resealed it, used it in a heated room...anything to make it happy. I have an order to get out and my customer wanted it in red. I should have knocked this simple print out in no time, but the red has broken off every single time causing me to start over only for it to break again and again and again. HOURS of wasted time and filament.OK...I tried it one more time after drying it again for 10 plus hours in the oven, the red finally worked. Very frustrating...but the other colors gave me no real problems. When it works, it works.

I purchased this over AnkerMake filament as it was half the cost. I've been printing it at 220C and it prints really nice, I haven't had any bed adhesion problems. Overall for the cost to performance I'm pretty happy with what I got.

Really pleased with the quality of the filament.

A double pack of this material was very economical, and on top of that the PLA preforms very well, I'm printing a complex object at 180mm/s right now, and had to down the flow rate to 97%, I think that's my printer settings, not that material, but it's printing beautifully. A lab calibrated Mitutoyo digital micrometer says the material measures at between 1.74 and 1.754mm. A bit of variation for sure (I measured about 1 meter with 5 measuring points), but nothing extreme and better than most. Actually the best I've measured yet I think. Very happy with this material. I recommend this material for the price and quality. Also I've has no adhesion issues that were not bad setup related.

He estado comprando varias marcas de filamentos para saber cual es el que mejor me trabaja. Definitivamente este filamento me ha funcionado de maravilla, solo realice sus test basicos y he obtenido impresiones bastante limpias, apenas logro percibir las uniones entre capas. Se los recomiendo para que lo prueben

SUNLUのフィラメントをずっと使ってます。造形条件が決まれば安定して使えます。参考までにプリンター；ender-3ノズル温度；220℃ベッド温度；60℃プリント速度；50mm/s