Ultra Laser Marking Aerosol, 2oz

Looking to improve your lasering game? Look no further than CerMark Ultra Laser Marking Aerosol! This stuff is like magic in a can, turning your dull, lifeless metal, ceramics, glass, stone, brick, and slate into beautiful works of laser art.Now, I know what you're thinking. "But can't I just use a regular old can of spray paint?" Absolutely not! CerMark Ultra is specially formulated to work with lasers, creating deep black marks at a range of power and speed settings. Plus, it won't tarnish or stain sensitive metals like brass and copper. Take that, regular old spray paint!And let's talk about the easy mixing process. Just shake the can thoroughly and voila! You're ready to start lasering away. It's so easy, even your grandma could do it.So, if you want to take your lasering game to the next level, look no further than CerMark Ultra Laser Marking Aerosol. Just don't try to use it on painted items, wood, or plastic, unless you want to end up with a hot mess on your hands.

The media could not be loaded. I was skeptical about this product as it is expensive for what you get. I bought it specifically for glass. This burns on the laser perfectly and you do not need to spray much for it to work great. As you see in the video it washes right off underwater. I hope the photo shows how dark the images are. Will be back to buy more.

Great product but I'd like a larger size. It's also very expensive.

Ok. So all the reviews I read were either "Great, exactly what I needed" OR "Stay away its no good!" There wasn't a middle ground OR anyone with actual pictures of these "works great" results.So to be clear, this product is to be used with engraving lasers it doesn't matter the brand or the wattage.Its primarily designed for metal but I used it on polyethylene water jugs. When you try to engrave resin or plastic most lasers just turn the surface white. I wanted the design to show up black on the surface of the jug so I bought this spray.When it arrived I though I got the wrong product because the aerosol can was small and only a couple of ounces, I'm sorry to say but the pictures make it look like you're getting an average sized aerosol spray can. I applied the spray to the water jug following the instructions. The spray is an opaque grey and takes about 20 - 30 seconds to dry. Every time I applied it, it only took a single pass to provide full coverage on the hobby surface. Basically it takes very little of the product to prep your product for engraving/marking.Once I worked out the exposure setting for my laser (atomstack x7 pro) these are the results I got.So I would say, it "works great", it does, its VERY expensive per ounce (hence the 3 stars on value) but it DOES do what its supposed to do.

Used one time and next day wanted to mark another stainless-steel tumbler. Could not get anything to come out of can. Tried to make a return, got the Question on why returning, answered "item defective or doesn't work", commented why I was returning, next got a troubleshooting option. When I answered the troubleshooting question (which none applied to the product) was not given the choice to replace or get a refund. No instructions on how to return defective can! Just the comment to "continue shopping" Will NOT purchase this product again.

I’ve seen reviews that said this does not work with diode lasers. In my experience, it does. The laser I used was xTool’s D1 Pro 10W laser, with the RA2 Pro 4-in-1 rotary attachment. I used its native software, xTool Creative Space. The settings were for the rotary rollers, 100% power, 35mm/s. I also had the laser module about 1mm closer than the focusing guide. But I would guess to venture that a 10W diode laser would be minimum. Anything less might not be as successful.FOLLOW the instructions! You should have no problems, if you do. I first washed the tumblers with hot soapy water, dried them, then used 99% isopropyl alcohol to do the final cleaning before applying the spray. Just a light spray to where you can’t see the metal, did well for me. Make sure the spray is completely dry before lasering.Clean-up is a breeze. Rinse with warm water, dish soap and a sponge or cloth rag.I did run a tumbler through the dishwasher and it held up just fine. Not sure how many washings it can take though.The contrast is beautiful! I was able to do 10 tumblers, two- sided with the 2oz. size, and I still have some spray left.

Used as directed and didn't work for me.

a great item but Pay attention to ounces