Legrand - OnQ Media Enclosure with Hinged Door, 20 Inch Metal Media Box with Key Lock, Cable Management Box to Hide Cords and Store Devices, Color, EN2050

As expected. Granted I took a very good look at the specifications before ordering.

Easy to install but the painting on the cover does peel off. Overall good stuff.

This enclosure is exactly what I needed for my simple wiring closet for cat5 connections (e.g.for WIFI access points, security cameras, etc). Mine was a surface mount installation, but it could also be installed between studs if the wall is open. I used the panel's bottom slots to bolt on 2 electrical boxes, each with two 120V outlets. I installed a 12 position RJ45 patch panel on the side (inside enclosure), and installed an 8 port switch in the center, using two sided tape to mount. I have also installed PoE adapters in the enclosure, as needed - also with two sided tape. The top three holes are each 2.5", already open, and I used them with 2" PVC conduit adapters and 2" electrical conduit - fitted perfectly. The instructions are very well written, with exact steps for mounting the panel (e.g. to plywood, which is what I did), and exact steps for hanging the door. Even someone very rusty as a DIY could follow these great instructions.

Perfect panel to begin centralizing our communication distribution for or home. Cable lines are completed and will continue with installation of telephone and LAN in the near future. Comcast X1 platform, and works great

Generally nice. The top knockouts are not close enough to the sides of the enclosure, which forces the installer to make cable turns just to get around the upper modules. Also, the modules cannot be effectively mounted in the top positions for this same reason... you need room for cable turns, so this wastes some space inside the enclosure.