Harness the Sun's Power! ☀️
The EPEVER MPPT Solar Charge Controller 30A is an advanced solar regulator designed for both 12V and 24V systems. It features a maximum PV input of 100V and supports a wide range of battery types, including lead-acid and lithium-ion. With a remarkable tracking efficiency of 99.5% and a user-friendly LCD display, this controller is perfect for solar RVs, household systems, and industrial applications.
Colour | Tracer3210AN+MT50+RTS |
Display Type | LCD |
Voltage | 12 Volts (DC) |
S**S
Solid well performing mppt solar charge controller.
I use several of these excellent mppt solar system charge controllers throughout my home solar panel system. EpEver seem very good at always regulating the varying voltages from pv solar panel groups, to maximise my 24 volt Trojan T105 battery banks charge rates. They always run cool, even at maximum power ratings, and are easy to programme using the unit’s push buttons, or the MT50 remote meter unit. They can also be controlled using a remote PC/Laptop and their own software package.
B**2
Works well
Used for Motorhome charging lithium 200amp hour batteryVery good 👍
M**E
Works perfectly, just does the job without any hassle
Fitted on my camper, works seamlessly, contacted chinese support and they replied fairly quickly...
A**R
Good piece of kit
Works exactly as it should
B**T
Excellent device
Easy to fit (replaced a dodgy unit from another manufacturer).Started charging within a second of seeing light. Doesn't need strong sunshine, charges well when overcast despite it only being connected to a single 100W solar panel.The (supplied in the kit) remote meter lets you fine tune the settings for your particular situation and can be mounted to a suitable location or used to set up then unplugged and safely stored for future use.The (also supplied) battery temperature sensor has approximately 3 Metres of lead was plenty for my setup should help with low/high temperature charge at temp extremes.In summary well made units with fairly easy to understand instruction manuals. Well worth the full price money, although I managed to pick it up at an offer price that made the VFM even better!
M**S
Very nice
I bought this to replace an old solar charger it is well worth doing
J**.
Very Nice Unit
This is a very nice and quality controller. It does come with the remote readout unit, but the extension wires are too short for my use. I wanted to locate the remote readout unit in the other room, but the wires wouldn't go that far, so I had to locate it not too far from the controller itself.There are so many to choose from, but I recommend this unit.
A**D
If you have a pwm you must get this mppt controller!
Great product used it for basic solar for boondocking, everything works well, getting more out of my panels with a proper mppt vs the pwm that came with the foldout panels. I used 4 awg flexible welder wiring to hook up the batteries directly. As well as the panels, will try 6 awg 8awg and 10 awg wiring to see what works best over this summer. Super happy currently charging my batteries at 13.3v 4amp on a high thin cloudy day. Most excellent.
B**
Perfetto
Nulla da dire. Ottimo tutto
I**T
You got all the information you may want to know about your battery.
Best value for the money!As I replaced the old controller I had to installed in the same place where previous was installed, that's the reason the remote MT50 is on the same panel.Love it and highly recommend.PSThe meter shown was installed prior and keep it there.
M**I
Funktioniert gut
Bis heute funktioniert einwandfrei und ziemlich genau, leider wie fast alle china Produkte, nur in Englische. Wird gar nicht warm und geräuschlos . Liefert Zeit war lang. Heute 05.01.2023 schreib ich wieder, inzwischen ist irgendwie etwas kaputt gegangen ( ich vermute die Sicherung) und habe den Verkäufer gemeldet ( per Mail) und gestern habe ich einen neuen bekommen. Der Verkäufer war sehr nett und freundlichen und hat sich darum gekümmert dass ich so schnell wie möglich einen neuen bekommen kann und bekomme habe. Sehr kooperativ 👍👍👍🌟🌟🌟🌟🌟Heute 03.09.2024 update. Der Wechselrichter funktioniert einwandfrei bis heute, in Beschreibung steht kann für LiFePO4 auch verwendet werden und dafür soll die Einstellung von Batterie auf default (default“ so viel wie Standard, also zum Beispiel ein vorgegebener Standardwert oder eine Standardeinstellung) gewählt werden. Ich habe das auch gemacht ( für LiFePO4 280AH Batterie) zwei Tage lang war angeschlossen und so wie es aussieht könnte die Batterie nicht laden, war zum ersten Mal ziemlich warm. Ich werde heute noch mal versuchen ( mit 2x300W Panel). Update wird folgen. Außerdem Laderegler zeigt nie an dass die Batterie voll ist egal wie lange und mit welcher Batterie und wie viel Panel Leistung geladen wird, er will immer weiter laden, ich werde Bild und filme hochladen.
Trustpilot
1 week ago
3 weeks ago