ODI MX V2 Lock-On Rogue Grips - Graphite

I’ve used exclusively ODI lock on grips for the past 15 years. DH MTB and both dirt bikes, the dirt bikes both have the Rogue grip pattern. The locking flange has always worked well for me and the integrated throttle tube is so convenient, I can’t see myself ever going back to gluing grips on. Throttle side fit perfect and snapped right into the OEM Husqvarna ‘25 TE300 throttle cam. Always a bit difficult to slide the left side over the knurled ProTaper evo bars but that’s because the knurling makes the bar a larger diameter. That gives you an idea of how close the tolerances for the inner diameter are on these grips. If you push and twist at the same time it’ll get there. My bars are the stock Husqvarna contour with 1/2” cut off each end so the locking collar isn’t on the knurled area. This meant I had to tighten the grip screw a bit more than the recommended 5Nm to keep it from spinning but it’s solid. I like a thicker grip and the Rogue are just a little wider than the regular grips or half waffles. They seem to measure about 0.11” bigger than the OEM Husqvarna half waffles I took off. ~1.25” compared to 1.14”. Not much, but that extra diameter is all padding. You can see how malleable they are in the video. They’re soft on the outside which helps reduce high frequency vibrations but still supportive enough to feel sturdy. The pattern is symmetric so rotation isn’t critical. That also means that you can rotate them around if you damage one side or wear it out. It would be nice if the Rogues came in open-end versions for those of us running wrap around hand guards. I learned a few sets ago that it can be hard to make a good circular cut just using your hands so there’s more cleanup work and it’s easy to slip and cut the outside edge of the grip. I thought about using a drill bit but even my forstner bits aren’t sharp enough to cut the rubber cleanly. I ended up using my wood lathe and a brand new utility blade to make a clean cut through the rubber and score the plastic underneath enough to make for easy punching out. I then used a long punch to just tap on it, didn’t even need a hammer. I understand you don’t want the ends to be too weak for people without hand guards but this could all be avoided with an open-end version like the half waffles come in. The biggest bummer of this purchase is that they’re not the advertised color. These are the regular light grey on grey, not the nice brown-amber in the listing images. I’m keeping them since they match the grey on my bike. The locking ring is a nice titanium-silver color which is never shown in the images so I included pictures of it. The color discrepancy is obviously no fault of the grip design, just the Amazon listing. Overall they’re excellent grips and if you like the bigger diameter you won’t be disappointed.

Best clamp on grips in the game! Last forever and makes for a smoother ride. only thing is the displayed photo on listing shows the black version and not graphite. So I assumed I was getting black. Overall worth it!

Received quickly. My first time with clamp-on grips, and they are a revelation. Simple install, simple remove. The throttle cable cam that fit my 2008 TW200 was included and easy to install. I use TUSK handguards on the TW and obviously had to remove the ends. Take your time and cut very carefully. Use a sharp blade. Repeat your cuts. The plastic on the end is thick and it will take time and attention. This is one area for improvement. The ends should be punch out, not cut out. Otherwise, the grips are comfortable and relatively thick.

Grips are great and the clutch side was easy to install. Just know that the throttle side requires that you remove the stock throttle tube and cable cam. ODI includes snap on throttle cams, but make sure on their website that the cam for your bike may not be included. Mine was not, and I had to order the right one. Figured that out only after I had cut the old grips off. So now I’m waiting on a part and have no grip. That’s the reason for 3 stars.

Love this grips! Great replacement for the worn ones that were on the bike. As comfortable as I could hope for!

First thing was the ease of installation which is 5 stars, great value, real firm grip very confident feel. Very noticeably increased my ability to ride longer without vibration. Noticeable decrease in felt vibration. Really nice product great quality.

Ordered ODI MX V2 Lock-On Rogue Grips for a DRZ400. Said it fits a DRZ400 but failed to mention that I needed to find and buy a seperate cam to fit (cam i) Nice grips otherwise.

Awesome grips. No arm pump bc of cushion grips.

Me encantaron pero solo la primera semana, después de ahí se volvieron exageradamente chiclosos y se deshicieron en menos de 3 meses...

Love the grips, color was wrong bit not a huge deal, not easy to put left grip on pro taper bars with knurl, but i assumed that, had to tap it on with a soft face hammer. These are the only grips that i will use on a 2 stroke, really like the diameter as well.

الجوده ممتازه

Easy to install, works as expected