YOBO Lighting Vintage 3-Light GU10 Ceiling Spot Track Light, Oil Rubbed Bronze

It's a great looking light especially for the price except as all the reviews state, inserting bulbs is a pain in the ass. Would be five stars except that seems like a design flaw that could have been remedied in several ways. The suction cups may work on a glass halogen bulb, but not on LED bulbs cause the face is usually a mix of plastic and metal. Suctions cups were completely useless for me. Definitely designed by a sadist.After 20 minutes of cursing, and I came up with a solution that works really well. See photos. Basically the problem is torque to lock the bulb in. So I push the bulb through a paper towel, insert the prongs into the socket, and use the remaining bulk of the paper towel above the bulb to twist and lock the bulb in. Then just pull the paper out Voila.

I was a little nervous ordering this fixture because there were no reviews for it, but it looked like the perfect light to complement my fancy light fixture in my hallway. My husband installed it on the stairwell, and it is very pretty! It looks very expensive and the light from it is bright. One thing (not a big deal) is that we have this on a dimmer using dimable bulbs and it is inclined to flicker a little if it's not turned on full. I don't know if it has to do with the bulbs or the fixture, but it's not a problem. The fixture comes with 2 little suckers that are supposed to be used to insert the bulbs, but I found it easier to hold the bulbs and push them in and turn. It's a little fiddly but once I got the first one in, the other 2 were much easier!The end result is gorgeous! Delivery was fast and the product sturdy and well made.

I absolutely love this light fixture. I bought two. There are beautiful and modern. I read previous reviews and I saw that others had issues installing the LED bulbs, mostly because the suction cup provided wont work on plastic. I inadvertently found the perfect LED bulbs that works great with the suction cup and a nail through the suction cup loop to help twist. Below is the listing.LE GU10 LED Bulbs, 50W Halogen Bulbs Equivalent, 3W 350lm LED Light Bulbs, Warm White Non-Dimmable, 120° Beam Angle, MR16 LED Bulbs, Pack of 6 Unitshttps://www.amazon.com/gp/product/B01EWBZLBK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

I like the lamp. A few facts here: The lights are dimmable IF you buy dimmable LED bulbs, AND you install the proper dimmer for LED lights. I also struggled to install the bulbs until I realized that you must use the suction cups AND use a small tool or something that you pass through the whole in order to twist slowly and the bulbs will get into place. If you try only with your fingers twisting the suction cup, it won't work. As soon as I did it this way, took me 10 seconds to install each bulbs.

This is a great fixture and it puts out a ton of light I used GU 10 LED bulbs. The three that they offer when you buy the light fixture on here. The suction cup will not stay on to lock them in. Which makes them a major pain To install !!!. I used double-sided tape just make sure you use a piece longer than the bulb is wide so you can peel the tape off. I still use the suction cup but it would not stay on to lock the bulb then until I used double-sided tape! Also this fixture the lights will dim if you buy dimmable GU 10 bulbs or at least the Phillips bulbs I bought.. It actually dims better than any LED light that I own it never blinks. No matter how low you take them.!

Used this to replace wall mounted light over bathroom sink in a remodel. Not too big for space and filigree cutouts fit nicely with antique theme rather than looking modern high tech. Connected to dimmer switch and it works just as it should. Allows light to be directed where needed and highlight features of decor. If replacement is for a ceiling light already wired, could be installed in minutes.

Pros: Look good, good value, easy to install the fixture.Cons: Very basic instructions, the bulbs are hard to fit because the holder is only a little wider than the bulb head so you can't grip the bulb directly and have to use the supplied suckers (it will make sense if you read the other reviews or when you get the fixture).Notes: I purchased these bulbs - https://www.amazon.com/gp/product/B01EWBZLBK/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1They are bright, white LED's.They have a glass face rather than plastic (as per some LEDs) and so the suckers can grip.I used the small sucker with a hole through it rather than the one with the "tail" and put a screw through it to twist - a lot easier to install the bulbs.Overall happy with the purchase and they look good.

Your browser does not support HTML5 video.  Beautiful fixture! I had the same frustrations with the suction cup not having enough suction to turn the bulb. Tried various methods listed... The one that worked like a charm was twisting with some electrical tape. See pics... Place tape on the bulb, leaving enough slack to twist around your finger. Long nails help... The tape and the nail gave me just enough torque to turn the bulbs. Removing the bulbs is easier through the suction method (not sure why). The fixture itself was a piece of cake to install (<10 mins).