🎨 Elevate Your 3D Printing Game with SUNLU S1 PLUS!
The SUNLU Official Filament Dryer S1 PLUS is a state-of-the-art solution for maintaining moisture-free 3D printing filaments. With a built-in fan for even heating, adjustable temperature settings, and a compact design, this dryer ensures optimal print quality and user-friendly operation. Compatible with various filament types, it is perfect for both novice and experienced users, making it an essential tool for any 3D printing enthusiast.
| Manufacturer | SUNLU |
| Brand | SUNLU |
| Model Number | SUNLU Filament Trockner Box S1 PLUS |
| Package Dimensions | 28.2 x 26.3 x 10.7 cm; 1.2 kg |
| Colour | White |
| Material Type | Polyethylene Terephthalate Glycol, Polylactic Acid, Acrylonitrile Butadiene Styrene |
| Number of Items | 1 |
| Manufacturer Part Number | DCDE-FD-EU |
| Item Weight | 1.2 kg |
S**T
Ok there are better out there but its cheap and does a pretty good job with a couple of tweaks.
Had some of my filament start really print bad and after googling the symptoms it sounded like the filament had too much moisture. So time to try a filament dryerBeing a cynical (and tight) old fart I don't believe most of Amazons reviews (I have a drawer full of wireless earbuds that back me up on this) so looked around elsewhere. There were some pretty good videos that showed comparisons of dryers only a few expensive ones were really good. One guy recommended getting one of these and putting a fan in it to improve circulation and pop a sachet of silica gel in the middle of the spool to grab the moisture. Ok, that ticked my boxes: cheap and tweaked to perform like something far more expensive.Right, to cut to the chase this has worked on all but one of my filaments. It's made most print a whole lot better, revived one that was what I thought was bin fodder but could not fix one (glow in the dark pla ).It does take a while to cook the filament but it is a lot cheaper that buying new and a lot less fuss that vacuum baggies. You can print a nice little fan mount and silica gel holder on thingiverse and buy buckets the gel on here dirt cheap.
T**S
Works well
As I was getting to the end of a 1kg reel, after several months of occasional use, it was clear that the print quality was dropping off and the PLA was snapping when stressed. So I thought I would give this dryer a go, and after 6 hours of heating (default) there was a marked improvement in the material flexibility and print quality. So I gave it another 6 hours and could see yet further improvements. So if it takes a while for you to get through a reel, or you have some colours that are only used occasionally, I would recommend getting one of these, to ensure that your PLA has not taken on moisture. Particularly if you are trying to print at speed, when the quality of your PLA material really starts to count.
D**D
Good for the price, but not the most robust unit.
Good for the price, but not the most robust unit. Does not have a fan to circulate air but I knew that before I bought it. User interface is ok, instructions could have been clearer. All in all, a pretty good unit. Does what it says on the box.
P**.
Great Item
Great Item and at reasonable price
L**E
Sceptical at first but worth it
At first I was hesitant to spend £50 on what is basically a mini oven but I kept getting problems with my prints and after replacing every part, I decided to try this in case it was my filament that was the problem.This thing works better than expected. I kept it running for 3 hours before print, PLA, 45°, and then let it continue throughout the next print. The results were better than I thought, if you look at the pictures you will see a before and after. Notice the tyre track marks on the Zombie Captain without the dryer compared to the Logan with the dryer.I would definitely recommend getting this if your filaments have taken on moisture.
A**R
Good value
Are there better dryers available, yes. Is this one very basic, yes. Does it dry the filament and let you feed direct from the box, also yes.For half the price of even the cheap alternatives it is hard to go wrong with this. It will take longer to dry the filament due to the lack of circulating fan but does the job I need it to. I now own 4 of them and have no complaints.
E**
Great product.
The media could not be loaded. The best thing I ever bought for my printer.Since I got this my prints has improved so much.I'd definitely recommend it, it just does the job. No more wet filament and rough surface.I wish I bought it earlier.
A**C
Revived my filament
Great investment. Revived my brittle filament in the space of a few hours. Would definitely recommend
Trustpilot
3 weeks ago
3 days ago
