weBoostWilson Electronics 3 dB 2-Way Splitter: N-Female - 50 Ohm (859957)

We added an additional antenna using this splitter to our 4g weboost connect. I was a bit concerned because we have 100ft of Coax going from the antenna to the weboost and another 100ft of coax going to each antenna after the wideband splitter which drops the signal -3db. This configuration pushes the limit of the coax loss on a good day yet we still receive 3 bars of 4g which is enough to stream video. Before we had zero reception in our house. Wilson makes a great product which has served us well. I highly recommend calling Wilson Electronics if you have any concerns. They have a great team of technicians which can advise you on setting up your antenna system.

What I ordered and what I got are two different things.* I ordered the the Wilson 3-way splitter that has the connections on the bottom, what I received was the older version with the connectors on each side and bottom (look at picture)*** When I contacted the seller they said that the model that they sent me is the model that they sale. When I pointed out that the one that is pictured and advertised is the newer version and the one that they sent me was the older version, they said that they would contact their listing department. That's been two weeks and the last I heard from the seller.**** Does the splitter work, Yes. Is it the one I wanted, no.* So far so good with the older version

Amazon happened to have a used one for $19.99 free shipping. Works great with my Hiboost Dot setup. I now have antenna upstairs and downstairs.

Not a cheap splitter like you would buy at the hardware store. This device is substantial, well built and professional looking.I'm not sure if its weather proof as there was no paperwork or instructions included. If there were I'd give it 5 stars. I know what to do with it, thats why I bough it but having a little info on warranty and specs would be nice.

I thought this was more expensive than it should have been, till I received it, and compared it to another splitter I bought for 1/5 the price. this is about 3 times bigger, and much heavier. The metal box is very thick sturdy metal. Inside the design is very simple (not really anything to break). I bought this specifically for cell phones, and it is tuned and optimized for that frequency range (instead of the wider range for TV reception).I uploaded a picture comparing the two splitters in size, and showing inside of the box.By the way, I used two internal antennas in my home after the splitter. The entire Wilson system works very nice, and I get 2-3 more bars, and at least double the transfer rate on data. Cell phone Antenna is on roof of two story home.

Seems to work...ALl over the house this spluitter DID NOT reduce the signal with 2 Antennas installed in the attic covering a 4000sq ft house. Now we have 3-4 Bars of $G signal and a SOLID 3 Bars of 3g Verizon signal from 1 lenght of our ranch home to the other.. Thank you Wilson electronics for this product the 700- 2700mhz antennas and the "4601034gPRO Directional kit".

Excellent splitter. Improved signal stability with lower loss

Adding this splitter does reduce signal strength by about half (-3dB). We have a long cable run, and the signal was noticeably reduced. The cell signal amplifier is installed in our garage; the signal is then split with one antenna in the garage and the other in our cottage about 100 feet away. The garage signal is strong since it has a shorter cable length. The cottage signal was noticeably reduced. The setup works great, since there would be no cell coverage without the amplifier. But be sure you have a decent strength signal if adding this splitter.

I installed a $1000 Wilson system to boost the almost non existent signal inside my home from the -101dbm (2 bars) signal outside. The system worked great, we had a reliable signal through 90% of the house, however the upper room furthest from the inside antenna had only a weak signal. I added an extra inside antenna to correct this using this splitter. We did notice a slight signal strength loss, I took measurements throughout the house trying each antenna on it's own with and without the spiltter. The splitter does cause some signal loss but since the second antenna over lapped the coverage area of the first one, we eliminated the dead spot without any reduction in call quality elsewhere. It is expensive but it works.

It has one job and it does it well. I put it in my attic to split off a second antenna for my Wilson cell repeater and it worked beautifully. I never have to touch it again after installation. There is a slight degradation in range of my antennas, but now I have two of them so in the end I am better off.

Idéale pour repartir votre signal Wilson pour 2 endroits au chalet avec le Weboost antenne de plafond

Good product

works great