ZIRODiamond Series Filament, 3D Printer Filament 1.75mm, Shiny Sparkle PLA with Glitter, Twinkling Neatly Wound 1kg/2.2lbs Spool, Fit Most FDM 3D Printers, Dimaond Purple

It's pretty. It prints well on my Bambu printers with an 0.4mm nozzle. Good bed adhesion, even with tricky novelty plates. This is good stuff. If you've got a kid that's into Hello Kitty, you can probably make good use of glitter red PLA...

We have ordered this same filament many many times. It’s a lovely bright red color with a small glitter effect to it. It prints well and is extremely reliable.

I bought this filament to print a set of extra gaudy bagpipes for St. Patrick's day. This filament tends to string/ooze quite a bit more than most PLAs, you will have to experiment with temperature settings but I found that lowering my nozzle temp and print speed seemed to help. I've had no issues with clogging or spool jams thus far using 0.4 and 0.6 mm brass nozzles.This filament's layer adhesion is phenomenal, easily the strongest of any non "pro" PLA I've used. I had to change my support settings after nearly mangling my first print trying to remove it - even a layer-height gap between support and print will stick together firmly, so be mindful of your support interface pattern. As a tradeoff the finished pieces are a bit "softer" than a normal PLA. I suppose this makes them easier to scratch, but the sparkle finish on these colors will hide scratches very well and a quick pass with a lighter can make the problem disappear altogether.The one thing I wasn't too pleased with is that the Emerald is noticeably darker in person than in the manufacturer's photos (and slightly translucent but I expected that). That said, I don't think I've ever encounter a filament that matches the manufacturer's photos when you get it. Overall I'm very pleased with this filament and will probably try another color of it in the future.

I bought this hoping for a glittery dark green to match the diamond-red glitter from the same brand. I didn't like the color of the diamond glitter greens (too "bright") for my use, so I got this. I was hoping it would be as awesome as the diamond glitter red. It's not bad; prints well, but it is dark and does not have much glitter sparkle. It's a bit hard to see in the pictures, but if you look at the side view, on the red you can see much more glitter in the side of the box.It is a very nice dark green though, and sometimes you can see just a bit of sparkle. So if that's what you're looking for, definitely go for it!

This is my 6th roll of ZIRO PLA filament and they have been great. Works fine in my Bambu AMS system and the kids loves the glitter color of this one. Will buy more in the future I am sure.No issues with adhesion. Features come out looking perfect, and I am printing it quite fast at 300 mm/s inner and 200mm/s on the out walls.

Ran a couple prints through the Bambu A1. They came perfect. But what impressed me most was the cleaning filament, sample filament, and mylar bag to store the roll included with the filament. Not a big deal, but also not something I received with any other filament so I thought they deserved props for this.

The filament keeps getting stuck before entering the printer head , the outer coating of the filament keeps getting stuck, it ruined 1 printer nozzle heating element to my elegoo Neptune 4 max , had to purchase a new one , I have printed the same piece with the silver filament 4 times , and they all failed due to it getting stuck on the outside of the printer head , I printed 4 pieces with the purple and 2 failed with the same issue , the coating is crimped and so far I wasted almost a whole roll combined .

I'm currently testing this filament and have found it to be a good translucent PLA. Its not as clear as PETG but that's normal for PLA so not a drawback at all.Overall the filament is easy to work with and prints nicely. Some care has to be taken though, lower layer heights will cause the tiny bits of glitter to cause pock marks or get stuck in the print itself. This causes a really rough texture and feels... Not great. Addittionally this means the print itself loses all the glitter and won't sparkle much at all.That said, if you can, print this at around . 18mm layer heights. The the effect is really nice and very noticeable there.Extra notes: polishing this clears up the layer lines and does make it a bit shinier but you run the risk of removing the glitter as well.I'll be experimenting more to find out what height this needs exactly.Tested so far;.18mm - sparkles nicely, low detail.18mm polished - shiny but not as much glitter.05mm - great details but too low for sparkles to make it throughUpdate: I unfortunately have to knock off a few stars. The reason for this is tangling. It got so bad the Spool rammed my printer and nearly knocked it over. I can only imagine what would have happened if I hadn't been nearby. The cause of the tangles seems to be related to the glitter flakes catching on the strands of filament beneath the one being fed. You may want to rewind these spools just to be certain that they wont snag on you.

Not only is this fantastic to look at, but it prints super smooth and maintains its glossy starry impression.Even more than that, the box contained a small spool of cleaning filament, and a sample of wood fibre filament! Very unexpected, but greatly appreciated for sure. Also had its own special (resealable) storage bag with spare desiccant packets.Quite simply, they went above and beyond and that was noticed! I'll be careful to select more Ziro brand in the future. Great company.

Mega tolles Produkt! Lässt sich super verarbeiten. Vorallem der Glitzer sieht super aus!

Not often you find a Glitter based 3d printer filament so had to give this one a try.Print results were very good and it produced some very attractive models.

I thought it was going to be more silver with a lilac hue, but I still love the actual color!

Je suis immédiatement tombée amoureuse de ces types de filaments, qui donnent une touche si agréable à tout ce que vous imprimez, que vous voulez des articles blancs ou monochromes ennuyeux ? Non ? BIEN SÛR QUE NON ! Cela lui donnera une petite touche supplémentaire pour tout ! Emballé hermétiquement comme il se doit, et comprend même un sac inclus pour le ranger une fois ouvert ! (Veillez à ne pas le ranger dans un endroit humide) C'est du PLA de bonne qualité. S'adapte parfaitement à l'anycubic Cobra 2 pro.Offert avec un fil de purge. Honnêtement, je ne l'ai jamais utilisé. Il suffit de chauffer l'extrémité et de la faire passer jusqu'à ce que vous voyiez la couleur suivante. Il ne laisse pas de résidu dans la buse.Dans l'ensemble, j'adore la couleur et je ferai certainement encore plus d'impressions 3D grâce à cela ! Les autres couleurs sont également magnifiques !