FlukeTP88 Rigid Back Probe Pin Set, 2" Length

They work great, and they're nice and sharp. The only thing I dislike is how long they are, if I could find some just like these but short, they'd be perfect.

These are *very* sharp pin probes which attach onto standard 2mm test lead metal probe tips. The attachment is a friction fit, without threading, so care is needed to prevent pulling the probe out of the TP88. I use these tips with a set of TP175E probes, and they work great for hitting fine traces on circuit boards and for probing connector shells. If your boards are conformal coated, this will go right through the coating to give a good reading.One thing to keep in mind is that these tips are only rated for 60VDC. For typical uses this is plenty, but always keep in mind what the voltage you are measuring could be.

I use these to diagnose MCUs on circuit boards. The design is pretty nice. You have long insulated stems so you can get a good reach all over the board. Works very nice under a good microscope. No issues with performance. But the cap that attaches to the lead is very fragile. Mine cracked pretty early. Fluke sent a new pair very quickly. Good company.

I was worried after reading some other reviews. The tips seem to be well made and good quality. They are sharp but not very well ground - the could use some honing. They did come with tip covers too.

They very easily slide over the tips of my existing meter leads, I thought my leads needed to be threaded but that's not the case. Small tips to get in behind molex plugs.

These work just the way I expected. I use them mainly for small wire (22 gauge) continuity checks and for tight electrical connection places.

Like everything from Fluke, it appears over priced, but it is worth it. I have struggled with back probes from lesser manufacturers for years. They bend, they don't stay sharp, the fall off the leads... I finally decided to do what I knew I should have done long ago. Just buy the right ones from Fluke. I did and I am happy with them.The only reason that I left 4 stars is because one of the pins had insulation that had to be trimmed back. It covered most of the tip. I trimmed it back to match the other and it works fine now. After seeing how easy it is to trim back, I may buy another set and trim the insulation much farther back, or remove it all together.

These are very high quality. Kinda pricey I guess for what you get but they are very well made. Nice small sharp pointy tip good for back probing or piercing wires. The shaft is rubber coated to prevent crossing them and shorting something out. I use them with my power probe 3 a lot

Perfetti, cari ma di qualita vanno benissimo sui TL 175

Estoy satisfecho con la entrega y la calidad del producto. Gracias.

Expensive for what they are but you don't have a choice if you have a fluke

Für SMD-Arbeiten sind diese Spitzen einfach fantastisch.Aber beim Aufstecken der Mini-Plastik-Käppchen habe ich mich schon mehrmals gestochen ...Ich verwende jetzt einen dicken Schaumstoffblock zum Hinenstecken als "Ablage".

I needed a long probe to put on the end of my test leads, these fit my fluke test leads beautifully. Needed them for testing Gas generator HT leads, perfect, just what I wanted.4 stars, because they are expensive for what they are.