RenFox Microphone Stand, Professional Adjustable Mic Stand with Screw Adapter and Pop Filter Suitable for Radio and Television Stations, Recording Studios, Compatible with Blue Yeti Microphone

I was looking to get a mic stand for recording audio and immediately saw this one since its comes with all the other stuff. I read some of the reviews and thought sure look its only cheap how bad or good could it be? Once it came I set it up in less than five minutes and was blown away at the quality of everything in the box. The stand itself is secure and can be re-adjusted to suit most desks. The range of mic clips was a welcome surprise since it wasn't even somethign I had thought about. I have a BLUE Snowball mic and the box came with an adapter for this mic as well as adapters and shock reducers for other mics. It came with a phone holdwer too, although I havn't used it myself it looks good quality. It also came with a bunch of cable ties too which was handy to secure my mics wire. There are adjustable knobs ar the moveable parts so you can secure it when you have the right setup. I realy dont have anything bad to say about this at all. For the price, I was expecting some drawbacks but there really aren't any at all! I would really advise people loooking for a good setup to buy this as it comes with everything you need.

The pack was perfect, but one screw had a broken thread from scratch and went worse after trying to use it.

After reviewing the many other mic clamps, I decided on this one for its numerous 'realistic reviews' and extremely good price. I am using it with a new Blue Yeti mic, and my obvious concern after reading rival clamp reviews was that the mic would not drop on the floor as others have found. Setting it up was straightforward, and the clamp did not damage my computer table surface. I had been concerned that the included (silver) 'Yeti' attachment screw would be a good tight fit after hearing reports that the mic had earlier manufacturing issues that oversized the hole slightly. This was totally not the case with my brand new mic, so a good tight fit all around. I elected to mount the mic standing upright on its holder - rather than having it pointing downwards, this together with the snug fit of the screwed-on mic led to great confidence in use. The arms movement in use was also positive and stable, so a real find and highly recommended!

After reviewing the many other mic clamps, I decided on this one for its numerous 'realistic reviews' and extremely good price. I am using it with a new Blue Yeti mic, and my obvious concern after reading rival clamp reviews was that the mic would not drop on the floor as others have found. Setting it up was straightforward, and the clamp did not damage my computer table surface. I had been concerned that the included (silver) 'Yeti' attachment screw would be a good tight fit after hearing reports that the mic had earlier manufacturing issues that oversized the hole slightly. This was totally not the case with my brand new mic, so a good tight fit all around. I elected to mount the mic standing upright on its holder - rather than having it pointing downwards, this together with the snug fit of the screwed-on mic led to great confidence in use. The arms movement in use was also positive and stable, so a real find and highly recommended!

You're getting a lot for your money with this product, I was looking around for a pop filter before coming across this and they're around 1/2 of the price of this when bought individually, so I'm happy to have bought this instead.The stand itself is very sturdy and supports the weight of a Blue Yeti mic when clamped to a horizontal surface. Do note that clamping to a vertical surface won't work well if your mic is heavy, it will lean, you would need a clamp that can screw into your desk for a proper fixture.The phone holder is a nice addition, I was using a standalone one that is similar but I prefer the use of this one so I don't have seperate things clamping to my desk.I'm not making use of the mic holder, stabilizer or the circular pop filter but they look built well and attach to the stand nicely. They're good to have in case I get a different type of mic in future.

I used this arm for a couple months. It was the first boom arm I bought, and it worked decently well, it was sturdy, easy to push the mic behind my monitor whenever it wasnt in use. But there are a few caveats:I ended up not using any of the included extras like the phone arm and the pop filter. The phone arm just wasnt useful to me as it seemed to struggle to fit my phone (Samsung A70) and I already have a webcam set up. The popfilter and included microphone cover just didn't seem to really do anything for the audio quality as I tested them in a couple different scenarios.The included shock mount is a very tough plastic, with not much give to it. So I couldn't actually fit my Razer Seiren Mini into the mount.I used the arm for a couple months, but wanted to check if I could get better audio quality with the desk stand included with my Razer, so I screwed and unscrewed the mic a couple different times. After about the third switch over, the included thread became stuck on the arm and almost took my mic with it. Luckily I was able to get the mic off the thread after a considerable time and effort using a vice grip, but the thread is still very firmly stuck on the arm at an odd angle. I have no idea how to get replacement parts for the end of the arm, so for now it is very much unusable.I think this is a great starter option for only 20 euro, but the added extras aren't really necessary or useful imo. Plus, as the thread has taught me, it's not the highest quality materials and shouldn't be used if you're looking for some flexibility in your set up.

Fabulous extension arm with great extras. Well worth it at the price.

Does the job perfectly, so handy to have the phone holder too. Fits my rode nt USB mic 👏🏼

À la base je cherchais un support pour blue Yeti, celui ci m'avait l'air complet et pas cher mais il est franchement inutile.Pour commencer l'anti choc est soit disant universel, mais bien trop minuscule pour beaucoup de micro!!La bonnette fait la même taille que la mienne sauf que vu l'épaisseur encore une fois inutilisable pour moi.On peut néanmoins i accrocher un Yeti grâce à une visse de basse qualité, mais bras à du mal à supporter le poids du micro.Et le support téléphone aussi ne supporte pas le poids du mien et tombe comme s'il était fait de papier!!Ce n'est pas du tout adapté au Yeti, la description est trompeuse c'est clairement juste parce que ce micro est populaire...

Wszystko, czego potrzebujesz, do zamocowania mikrofonu.

Très satisfait de cet achat.Au déballage tout est très bien rangé et respire la qualité.Le bras qui est l'élément essentiel est un peu court mais c'est plutôt un avantage pour ne pas encombrer l'espace de travail et la vue. Il est de très bonne facture et c'est un plus car c'est un élément essentiel.Autre élément essentiel : le filtre anti-pop qui est performant. Je n'ai pas testé le porte-micro avec élastique mais il semble très correct. Les clips en velcro porte-cable sont biens.Petit bémol : les vis métalliques sont légèrement fragiles. On évitera de les serrer à mort comme un bourrin à l'installation. L'ensemble est plus que convenable pour une utilisation quotidienne dans un home studio.J'avais un doute sur sa capacité à porter un micro lourd : il prend sans sourciller mon Shure SH55 de plus de 600 gr. Il devrait prendre un Yeti sans trop de problème non plus.J'ai déplacé le porte téléphone sur mon bureau comme on peut le voir sur les photos et c'est génial.Force est de constater que ce produit a un rapport qualité/prix imbattable.

Venía buscando un soporte para el micrófono que me acababa de comprar y leyendo las opiniones de este me parecía la mejor opción por el precio. Se trata de un soporte bastante completo ya que incluye soporte+filtros+soporte de móvil.El soporte es de metal lo cual lo hace robusto, aunque el cilindro que une el soporte con la base anclada a la mesa, cuando el soporte está muy estirado, da la sensación de que podría llegar a doblarse. Por ahora no ha sido el caso y aguanta bien.Pros:- Precio- Dos tipos de filtro antipop (funda y brazo)- Soporte para el móvil que se puede colocar donde uno quiera en el brazo.- Sirve para mesas de hasta unos 5.5 cm de espesorCons:- El soporte de araña me da la sensación de que si se intenta dar mucho de sí podría acabar rompiendo (no es de metal). En mi caso no me sirvió puesto que mi micrófono es más ancho y tuve que anclarlo de la manera convencional. El diámetro del soporte de araña es de unos 4cm (ampliable pero no mucho más)En definitiva, por el precio pagado, estoy bastante satisfecho con el soporte a la hora de poder hacer mis videollamadas y otros menesteres. También es recomendable que tengáis en cuenta las medidas de los brazos en función de dónde lo vayáis a colocar, ya que para ponerlo en el lateral de la mesa cerca de donde nos sentamos es perfecto pero igual se podría quedar corto si os pasáis con la distancia.

I thought this was not gonna be a stable microphone or be able to hold up my Blue Yeti. But turns out it did a wonderful job holding my microphone and it hasn't broken or anything. The instructions that was given was really easy to follow and install and its very adjustable how you want it to be set. You can change the how it holds the microphone and the stands balance. It was so simple and easy!Now I'll be using this in the future and I'm gonna recommend it to some of my friends who wants to be streamer. This microphone stand was very cheap but has the quality of a 50 dollar one!