SUNLU 3D Printer Filament, Neatly Wound Rainbow PLA Filament, 1.75mm PLA Filament Muticolor for Most 3D Printer and 3D Pen, Dimensional Accuracy +/- 0.02 mm (2.2lbs), 330 Meters, 1 KG Spool, Rainbow

The SUNLU 3D Printer Filament in PLA Meta is an outstanding product that has greatly enhanced my 3D printing experience. This filament offers exceptional quality, ease of use, and excellent results for all of my projects.The glossy surface finish achieved with this filament adds a professional touch to arts, crafts, and 3D projects. Its high purity, good adhesion, and superb layer bonding ensure excellent print quality and stability.The neatly wound filament is a testament to SUNLU's commitment to quality. The professional production line and strict manual checks result in neatly lined filaments with minimal kinks or breaks. This attention to detail ensures a seamless printing experience.The SUNLU 3D Printer Filament in PLA Meta is a top-tier choice for any 3D printing enthusiast. Its high speed printing capabilities, recommended settings for toughness and non-brittleness, glossy surface finish, neatly wound filament, and high compatibility make it a must-have for all 3D printing projects.

Price was right finally for an assortment of 8 colors, Sunlu PLA Meta using prime. First, the colors are awesome, very pleasing to the eye. There isn't the super glossy finish, it's not a matte finish but it is much less shiny than normal PLA or PETG filaments. That's what I was looking for. It does flow very well and at lower temperatures than PLA. Electricity usage dropped about 30%, I have a UPS which can display the wattage being drawn. Layer lines are much less visible than other filament types. I had no extrusion issues at all. I haven't found one negative about this. There is always fine tuning needed with any new filament if you're seriously into 3d printing. Running an ender 3 with dual gear extruder, capricorn bowden tube and on a Comgrow glass/ceramic plate. Printing like a champ.

The product looks to be of good quality, packaged well, and very neatly wound so no kinks or jams etc.. Haven't gotten the chance to use it as of yet but will modify the review post use. All in all even without using yet I would still purchase from this company again.

Low temp and high speed print is really possible with this type of PLA, atleast a bit faster than regular PLA. Prints are also stronger than regular PLA. However, fine tuning temperature, filament settings and print speeds, is tending to be a bit difficult. I use Prusa Slicer, I have run out of almost 2/3rds of the spool and I am yet to get consistent mind blowing prints.Bed Temperature: 60, Nozzle Temperature: 200 base, 190 for the rest - seem to be the best middle ground I could find so far. I am going to continue tuning it. However, quality it is a little ways away from regular PLA and out of the box profiles for Generic PLA.

Starting off, I bought this filament because of it's affordable price tag, and almost no other reason. I was looking for ok filament for a great price, but what I got was far from that. First impressions where good, it shipped fast and came tightly sealed in a vacuum bag with an adequately sized discant packet unlike some other cheap filaments I've purchased. I first measured the diameter of the filament in about 20 different spots and found that it was within spec, also, unlike some other cheap filaments. I then began printing some test prints to test for moisture and found that it was good. Not only did the prints come out exactly how they should, they came out beautiful and bed adhesion was reliable and strong. At normal speeds this filament produces great results however at higher less reasonable speeds it still produces a "Usable print". Compared to some other filaments I've used this Sunlu PLA did very good at super high printing speeds. This is definitely high quality filament and a great value. The most pronounced benefit I can highlight about this filament vs some other cheap alternatives is that the bed adhesion is great. Many cheap filaments have terrible bed adhesion due to a variety of factors. Overall I'm pleased with this filament and could not find any major flaws in my spool.

Sunlu is always good, I get consistent results with their filament. There are a few other brands for pla I have used but consistently this is the brand I buy. Works great, no issues. My predator and ender both use the same sunlu filaments with zero issues.

I like this filament and it's gloss appearance. A little more flexible than regular pla. However, I've found that I've needed to bump up the temp from its recommended 200 to 205 to get it to to print well and adhear to the build plate.

No issues aside from on my end I had the temp set below the low for it by accident and my frost print was not great but I was able to save it with some liquid 3D resin aside from that I had no issues with how this printed it came out clean and held together

muy bueno por el costo imprime de maravilla en flsun SR a 222g

Costo un poco que se pegara, pero use laca y con eso no se ha despegado

El filamento NO llegó del color que pedí, lo pedí azul y llegó naranja, sin embargo es de muy buena calidad y funciona bien, solo que no era lo que queria

Al parecer el carrete estaba mal enrollado, se atoraba el filamento en el carrete, además de que no pude imprimir de una forma adecuada debido a que el filamento se atoraba en la boquilla, cambie tres boquillas e incluso los parámetros de impresión pero siguió dando problemas.

I had ordered the premium Marble textured PLA fillament and received a very dirty packet of white ABS one. 😒