SUNLUABS Filament 1.75mm for FDM 3D Printer, 1KG(2.2LBS) ABS 3D Filament Accuracy +/- 0.02 mm, Blue

I've used 20 reels of this brand filament in the past 6 months (running a print farm)It's the best branded filament I have used, tried others but always come back to this.Less warping, less shrinkage meaning less waste.Theres cheaper brands about but won't perform like this.

The filament comes well packed in an vavum bag with some desiccant. This keeps it dry during transit.The filament itself has a good tolerance on the diameter. Therefore the resulting extrusion is quite consistent. This means that the prints are very clean with good layer alignment and surface finish. I've found that this abs warps slightly less than various other abs filaments that I have tested in the past.

I really like printing with this ABS filament. I've tried a couple of others that are supposed to be easy to print with (eSun ABS+), but this always comes out the best.I've not had many issues with reliability. The smell isn't too bad and the print quality is excellent. I'll definitely be ordering again.

Excellent filament. On 2nd roll now and not had a moments problem with it.

Great colour, prints fantastic on my flash forge creator pro at 235c with 105c 3mm borosilicate glass bed.

Seems to do the job just fine.. most of the timeOfcourse you must be setup to print abs or you'll always struggle to get good consistent results, i've found this filament doesn't warp compared to other i've tried, however i've had extrusion issues as of lately but likely due to moisture.

I've had this for about a year now. Filament frequently clogs up my printer, frequently breaks off. Doesn't stick to board. (I use 230 ABS x 100 bed, for my temperatures). I would stay away from this brand in the future.

Headline says it all.

Sunlu gör bra kvalitets filament!

Lässt sich sehr gut verarbeiten, schöne Oberflächliche

Lo use para imprimirme un StealthBurner y el resultado tiene muy buenas calidades.Hay que tener en cuenta que para imprimir abs hace falta enclosure y si es calefactado mejor, en mi caso no era calefactado.En cuanto a la resistencia de las piezas impresas muy bien todo la verdad es que me sorprendio.El producto calidad precio esta realmente bien.

Produit de qualité et reçu rapidement.

Un gran bel filamento, nonostante sia abs quindi notoriamente difficile da stampare, con questo non ho avuto alcun problema, con una ender 3 con hotend all metal si stampa bene e anche la finitura opaca è veramente stupenda. Bisogna ricordare che non si deve stampare all'aperto ma va messo in un enclosure e bisogna stampare stando attenti ai gas nocivi.Se a qualcuno può essere utile per la stampa utilizzo come detto una ender 3 con il piatto creality dalla parte liscia con un leggero strato di colla stick a 105 gradi con ugello a 250 senza ventola di raffreddamento con una velocità di circa 55 mm/s. Altra cosa importante è quella di far raffreddare la stampa un buon 40 minuti prima di toglierla dal piatto, anche questo filamento soffre di delaminazione se tolto a caldo.