MMSD Customization Mod SMMSDve Extension Power Supply Cable Kit 18AWG ATX/EPS/8-pin PCI-E/6-pin PCI-E (Purple Mix)

These cable are really bright and vibrant. I was a little disappointed that the cable combs weren't pre-applied like some users have reported. I had a terrible time in the past with cable combs and was worried they wouldn't look nice. I was wrong. The combs were of good quality and the came out looking nice, with some patience, not enough to remove a star. Purchase these instead of the more expensive cable mod versions and you wont be disappointed. Thanks to Bitwit Kyle for sending me here.

I purchase two of these PSU Extension Cable kits for my systems at home because I was looking for something a little higher quality and different colors than the full length cables I have been using for the past couple of years.When they arrived today I was supposed to find them packaged the way they were. I figured they would be in a bag of some kind but they arrived in a nice box, thin but nice, with additional plastic bags inside to box for the cables, and two different options of cable combs.The extensions feel quite good in your hands and the addition of handling gloves is nice but likely unnecessary. Plus the gloves are quite small and wouldn’t work with someone whom has bigger hands. None of the ends were damaged and I spent a while tugging on each cable seeing how well they were inserted into the ends and only one was a little loose. The rest held quite well and the pins really didn’t move much at all.The colors of the cables are quite vivid and show well amongst other parts of the builds I have put them in.There are a few things I wish I could improve though. First the three cable combs for each cable may be enough for the CPU power and ATX power cable but for the GPU cables that is lot nearly enough. Now I was installing SLI GPUs which led to the use of all cables in the system and therefore I ran out of combs and had to use some that were lying around. I think 5-6 combs per GPU cable would be good. Also the molding left some flags on the combs that needed to be removed to ensure that they look good. Now I was under the impression that these cables were going to come preinstalled with one piece combs and they do not, however for the price I cannot complain. In addition the included combs hold extremely tight on the cables making it easier to bend them the way that I needed.Overall, these cables I feel were a great purchase and that I look forward to using them in the future. I hope they have a dual CPU power kit available at some point as well.

The only beef I have is not just with these, but the way virtually all of them are manufactured. Please for the love of god someone run shorter leads on the inside or lower row, especially on the main board lead, so we can arch the harness without binding up the lower row. Making it curve off the board, especially the large motherboard connector that has to immediately exit through the case. Which leaves the wires bunched up in spite of hours of painstaking work. Also mine had a few pins simply pop loose from the end connectors with little to no stress on them at all before even getting started. I plan on getting the pin release tool, new pins, and doing this customizing myself. Other than that, this cable set is really good looking and the wires stay in shape so they don't deform while installing them like their thinner counterparts. The wires are thick, the material they use for the covering won't show dust. The combs fit nicely, are snug, and are fairly easy to install. They came very well packaged with ample wire combs to do almost any kind of install. One of my computer geek bud's saw these and ordered his own that very day.

I wanted to add a bit more color to my build and this kit looked to be the one. Installation was very simple, More then enough cable combs were included in both clear and black colors (I used the clear ones). The item came packaged well with the cables being place straight into the box. They bend very easily no need for heat like some other kits required in order to mold. Very nice sleeves for the price. I highly recommend this cable extension kit if you are looking for a cheaper alternative to cable-mod products. These cost less then half the price and work just as well.Pros:More then enough included cable combs.Packaged well.Great sleeve material.Easy to bend and work with.Nice colors.

Ok so I saw a review on AsiaHorse cables and they stood out on the video I saw. But when I got mine, they were the same material has the cheapest cables they showed on the video and they looked not flattering at all! On top of that, I got all purple cables!!! I’m sending these back at the moment and looking elsewhere.

Not worth the money. Don’t do it. Those are an extension set which means generic ugly cables will still have to be used. And those are not easy to set on place for good looks. And not a full extension set either. Just cpu and rgb. What’s the point? Didn’t use them. Sending back

Not going to lie I've never heard of this company so I was a bit skeptical but the price wasn't to bad so I bought it. To my surprise it was pretty good quality. A bit stiff but to me thats a good thing because it stays straight when bending. Overall pretty satisfied.

The AsiaHorse cables feel and look as good as the far more expensive CableMod cables. If you’re looking for a low-cost alternative to the expensive custom cable extensions out there, this is a great option. The cables are very bendable and they come with plenty of good looking cable clips. I will definitely buy from AsiaHorse again next time I build a computer.

... just make sure it fits.My Seasonic FOCUS 850 Platinum does not have a standard ATX motherboard plug so it doesn't fit. Also, it's a custom build (TT P3 case) so the cables would have been a bit short. I should have checked and measured what I needed, instead I just wanted to have it all on hand when I started to build. Rookie mistake, not Asiahorse's fault. The cables look nice and well built. I'll likely keep em, returning them punishes them for my mistake.

Randomly causes my computer to shut down and sometimes will not boot because there is an issue with the 24 pin not supplying enough power due to a cable being loose. I shouldn't have to wiggle around an already tight fit and risk damaging my motherboard just to make it work. Reached out to seller several days after delivery and was never replied to. I cannot recommend this brand and I certainly won't purchase from them again.

Looks great, feels premium, very affordable. Inner side of the curved cable isn’t shorter so expect to have a long conversation with your OCD side regarding the mess at the back of the motherboard tray. Don’t worry, none of your jealous friends will see it.

I love how these look. The purple is the perfect shade that i I was looking for and the set even came with both black and clear cable combs. Much cheaper than custom cables and these work great as long as you have enough room behind your motherboard to manage the excess cable length. As a side note these are thick and very easily trainable.

Cable headers feel like cheap plastic and are very ridged. Cut myself trying to install these, the plastic clip separated my nail from the skin. And keep in mind these are **CABLE EXTENSIONS** not the cables themselves. You will need the actual cables that came with your PSU eliminating any hope of shortening cable length if you have long cables. I should also mention the lack of 2 4pin cpu cables, only 1 is included so you if you have a motherboard like a z390 Aorus you’re outta luck.

Cords are beautiful but my motherboard wouldn’t post with them installed so I can only assume that the wires were faulty or not seated in the plastic terminal at the end. I removed them and plugged my PSU cables directly to the MOBO and boom instantly posts. On the upside I did get a refund when I returned them.

These cables were well worth the price I paid. The braided cables look durable, though of course only time can be the real judge of that. They look great in my case and I found the material easy to bend in just the way needed for both my motherboard and GPU. I will be using Asiahorse cables for all my builds going forward.