VIVO Small Keyboard Tray Under Desk Pull Out with Extra Sturdy C Clamp Mount System, 20 (26 Including Clamps) x 11 inch Slide-Out Platform Computer Drawer for Typing, Black, MOUNT-KB05ES

I wanted a sliding Tabled for my keyboard. My previous Sliding table broke and I had ordered one before this from amazon and it looked good and similar. but did not work as well and was too large so I kept looking for another exactly as i needed and then found this . So Easy to put together and very rigid and solid. when I put together the product it fitted perfectly and worked perfectly. Fantastic value for money. Recommend anyone to grab one. please note to have Mouse on the table as same time as keyboard you would need a smaller keyboard. Please check and measure carefully its size and dimension.

Pros: - Sturdy enough to support my mechanical keyboard, which weighs over 1kg. - The 86cm length accommodates a full-sized keyboard without compromising mouse space for gaming. - The large clamp and clamp cap keep the tray securely in place, even when the keyboard's weight is unevenly distributed. Cons: - Limited mouse space when the tray is not pulled out, which may not be suitable for vertical ergonomic mouse. - Feels slightly stiff when sliding the tray out.

Over months of use the tray titled stightly so it's not even anymore. Great system for people who do not have any other option. But if you can buy real slider rails from DIY shop and prenamently attach a tray and secured in multiple locations, not just the edge instead of clip-on system. Then that will be better.

I was searching for a tray to keep my midi controller, this one is wide enough, not tall enough. So I got from same company height extender for this very support and it just worked perfectly well. Very strong material, very well finished, worth of you money. Assembling instructions easy to follow. I couldnt be happier with this product.

I had to remove my previous shelf as hinges were damaged. Replaced it with this and it's better than my old one. Spacious and solid. Recommended.

Nice product, easy to put together. I had to return because my desk has metal bars that block the clamps.

Nice solid and reliable. The one I received had two of the pre-made guide holes in the wrong place so I have had to prepare my own which I chose to do instead of returning it. Functions very well and what I needed it for.

perfect, in dimensions, in that its longer than a previous model i'd bought and it fits nicely under the standing desk panel and the unit slides really smoothly.

Bonjour, Le moins cher et pourtant excellent, la qualité de fabrication et bonne, ,robuste et pratique, je ne regrette pas cet achat.

Needed this for my 49 key MIDI keyboard and it's the perfect fit, except for the height which I bought the height extender from the same brand for. So happy!

The tray feels very solid and sturdy, and slides very smoothly. Also very easy to install and looks very clean. The quality definitely feels good and not cheap. It's wide enough to house a full-sized keyboard and a comfortable amount of room remaining for a mouse. It was well-packaged and didn't show any signs of damage. Some observations based on my first few days of using this: - There is very little clearance between the tray and the bottom of the table. Make sure you measure carefully. My tabletop is about 1-3/8" and there's only about a 3mm gap above my Razer Deathadder + mousepad. - There is no height adjustment for the tray, so for best ergonomics you'll want to use this with an adjustable standing desk. However even with a normal desk, it's still a lot more comfortable having the keyboard lower when you're shorter. - There isn't any covering on the side where the tracks and ball bearings are (which is the case with a lot of these trays). Sometimes I find myself resting my hands on the sides or trying to adjust the tray by holding the sides - and end up with a handful of lubricant - The tray is 11.5" deep but only about 9.5" will be "out" of the table at max extension. I have a Grifiti wrist pad that's about 4" wide, so with a standard keyboard, the row of F-keys are basically right against the edge of the table. - You can only install it in one of 2 ways - either you have 9.5" of extended space and ~1.5" poking out from under the table when it's "tucked in", or you can have about 8" of extended space and the tray being almost flush with the table edge when tucked in. Either way you'll have at least a little bit poking out and some lost space.

Bandeja para teclado, funcional, ergonômica, sem furos, de fácil montagem, discreta e bonita. Recomendo.

Viene muy bien empaquetado. Fácil de armar, trae instructivo. Fácil de montar. Materiales pesados, sólidos, con buen acabado, lo que le da una percepción de calidad. *De preferencia tener un escritorio resistente y sin ningún soporte o tabla en la parte de enmedio para que pueda retraerse por completo. Mi escritorio no cumple con esas características pero le fue muy funcional el soporte de teclado y mouse. Es necesario uno de estos para corregir la postura. Lo recomiendo ampliamente para corregir la postura del cuerpo. Compré el (large) y le quedo muy bien al escritorio con 1m de largo, aún le sobraron algunos centímetros.