RFID Locks for Cabinets Hidden DIY Lock,Electronic Cabinet Lock, 【with Battery】，Punch-Free，for Wooden lockers, wardrobes, Drawer lockers

Fácil de usar e instalar, pero los llaveros no tienen mucho alcance

Decided to install lock in my custom built media console when my 1.5 yo figured out how to open it and started to peek inside. Works perfectly without having to drill any key holes and such.Regarding installation, it was a tricky one. The included manual does not have installation instructions and it took me some time to figure out how to align both pieces to match. The trick here is to use double sided tape while you’re aligning them, so you do not need to drill holes to hold them in place. First, push the smaller piece into bigger one, then tape bigger one inside so that smaller one is almost flush with the surface where the door will be. Then add double sided tape to the smaller one, peel it, close the door (thus pushing the door against the tape), then unlock the lock with NFC key and open the door. The smaller piece will stick to the door thus marking where it should be. You might need to adjust the bigger piece forward and back (unpeeling tape and sticking it again) to ensure that the lock engages properly and does not leave a hole between the cabinet and the door.

These locks are the coolest thing

I put it on a desk drawer in my office. It is very strong. It opens every time I tap it. 2 1/2 years on the original batteries. I am ordering another one as I moved my office and left it behind with my desk donated to the next business instead of removing it. I left the access cards so they can enjoy how well it has worked for me.

I got this to lock a cabinet door to keep some stuff locked away. Overall it's great! The cards all worked right out of the box, but I reset and reprogrammed them anyway using the included instructions. I had to fabricate an additional latch so the one lock would secure both sides of the cabinet, but it was pretty easy to do. I was struggling with installation as I wanted the small locking pin on the door but then I couldn't get the card to read. I ended up moving a few things around a bit and got it working. Instead of putting the card on the face of the door, I put the card on the shelf directly above the cabinet. The reader easily worked through the 1/2 inch shelf. Now everyone thinks I'm some kind of secret agent because I use a key card to open my cabinet!

With only 4 screws and lining them up properly I was all set. Very easy installation. It was also super nice that the cards and key tags were already linked up to the lock.

This thing has so many possibilities. I used it to put a hidden lock on a cabinet. The signal passes thru 5/8 particle wood no problem. Its a little thick but nothing rediculous. Appears to secure the door quite well. The only difficult part about it is lining up the door latch part with the lock mech hole. Well worth the cost. Comes with several cards and key fobs.Update: been using this for about a month now and love it. Works great. It's invisible so no one even knows there is a locking device in its location. Nothing to pry and no one knows where to attempt to break in to. Batteries hold up well too.

Locks securely, nice supply of RFID tools supplied with the lock. Be sure to change batteries as lockout can occur with dead batteries.

The final end product is a great value. If you are handy with tools and patient with trying to get poorly documented electronics to work and have a couple hours then go for it.Here are the problems I faced:1) the manual says to code the white cards then the red tags. Just tap them. Easy! Well, after about 20 minutes of hacking around I finally accomplished that task2) there dimensions in the manual are the manufacturing dimensions and useless for installing. There is no template or info of how to measure and place one part in the correct spot vs the other. For me, it was a lot of measuring, mistake making, trial and error of moving it around. Ultimately I put my phone inside the cabinet to video record how it lined up when closing.3) the key cards or sensor are not powerful enough to work well through a cabinet door. So I had to cut a lot of cabinet material out under the electronic mechanism being careful not to go too deep and cut through the cabinet.4) Overall I spent over two hours on this and I have a lot of tools and am quite handy doing stuff in general. I can only expect a lot of people who buy this with the idea that it is easy end up breaking down crying trying to install

Works well

RFID tag not received with product only smart cards received. Can’t carry smart card. Need RFID tag. Please get it delivered if your showing it with your product.

The red so called rfid tags don’t work . Smart card works.Main problem is the lock is not holding correctly , can be easily open without key.