Motorcycle Turn Signals Front Rear Turn Signals 12V with Bullet Shape

Once I received these lights, I liked them enough I ordered a second pair for the front. I am installing on a 2017 Yamaha FZ09. I am still in the process of wiring it, so once done and I get some time on bike with them, I'll update my review if necessary. So far, so good. Install in pretty straight forward. They are pretty cheap price wise, so we will see how they hold upWith the wiring on my bike( two wire), I am wiring the running light[blue wire] in to a constant key on illuminated, from the license plate light circuit.At least with the back, one thing I did notice is that I had to reverse the polarity of the wires, from light, to wires on bike, hot to ground and ground to hot( red to black and back to red) to get them to work as intended. I am not sure if that is a function of my bikes harness wiring, or the adapters I got to use and be plug and play with no cutting my wiring.The other interesting thing to note, is that my front blinkers are two wire as well, but always on, and blink off, when the blinker/hazard is activated. rear is off, until activated. Most Jap bikes are like that I believe.

very nice lights. They light up very well. I recommend them, they are easy to install and the lights do a good job

the DRL not is too bright but, beautifull concept, the amber led work perfect and looks excellent for my SUZUKI

These are not the best quality but they look cool for sure and as long as you dont look close they're fine. A suggestion to the seller, maybe get the manufacturers to boost the qualityUp a little bit and raise the price to compensate then this would be an obvious choice. The plastic molding is a little rough around the edges, and the bolt where the wiring comes out of is not sealed so I highly doubt this is waterproof. That being said if they last I would buy again.

I like the style of these, easy install, seemingly just what I ordered but they just arnt bright enough. You can't even see them from the car behind.

Love this product for the price and installation ease. Had to splice red and blue to positive wire to use both amber and white light and black to ground of course. Would recommend and do not tighten bolt to much or you will remove bolt from harness. Hope this helps.

Easy install if your bike is set up for led’s. I have an older bike and needed an extra part for led’s to work. Not the fault of these lights, they are great.

They would attach to the cross bar on the front of the bike, but the transition between the two was horrible. Quality wasn't there, and not much brighter than stock.