Specification: HF QRP transceiver, put battery 12v and ANT can qso. DC IN: 9-15V Max: 3A Output power: <= 10W Transmission: 160, 80, 60, 40, 30, 20, 17, 15, 12 and 10 m amateur bands. Receive: 3.5-30 MHz nominal value, including general coverage, 0.8-32 MHz, reduced specifications. MODE: CW, LSB, USB, AM, FM (N, W), SAM, FreeDV Bandwidth: 300Hz-10Khz Adj SWR: Display 1-5 Better than -108 dBm (0.89uV) in a 2.3 kHz bandwidth Better than -120 dBm (0.22uV) in a 300 Hz bandwidth Shell design: detachable Stm32f407VGT6 1M memory Receiver sensitivity is 10dB S / N, CCITT filtering, using 28.3 MHz: Enable frequency conversion: Better than -111 dBm (0.6uV) in a 2.3 kHz bandwidth Better than -126 dBm (0.11uV) in a 300 Hz bandwidth Frequency conversion is disabled: Better than -108 dBm (0.89uV) in a 2.3 kHz bandwidth Better than -120 dBm (0.22uV) in a 300 Hz bandwidth The above specifications apply to receivers that perform published sensitivity modifications. Available TX / RX modes: CW, USB, LSB, AM (full carrier, double sideband), SAM (double sideband reception) and FM.AM transmission and FM transmit/receive functions (highly recommended) can only be used when "Frequency Conversion" is activated! ) FM options: carrier (ultrasonic) squelch, sub-audio tone encoding and decoding, audio burst ("whistle") generation, "narrow" (+/- 2.5 kHz) and "wide" (+/- 5 kHz) deviation And select 7.2, 10, 12 or 15 kHz pre-detected receive bandwidth. Package List: 1 x SDR Transceiver 1 x Handheld Microphone 1 x Wrench 1 x BNC to SO239 Adapter 1 x 110~240V to 12.6V Adapter(Without Plug)
Trustpilot
2 weeks ago
2 days ago
