Colossus - Gamepad Controller & Headphone Hanger Holder - Designed for Xbox ONE, PS4, PS3, Dualshock, Switch, PC, Steelseries, Steam & More, Black by Brainwavz

So the biggest disappointment is that it is 3D printed; that makes the price kind of hard to understand.Regarding the adhesive, I have seen some issues in other reviews but it seems quite solidly attached to me. It's the kind of adhesive that if you aren't careful while removing you can damage the surface of the wall, so bear that in mind.The easiest answer that comes to my mind when people complain about the adhesive failing is they they might not have dutifully followed the prep and cure directions; clean the wall, and let the adhesive cure for 24 hours under no load following application. The big caveat to that statement is time; I haven't been using it for long. I will update this review if it fails on me.Edit: 10 months later, it's still on the wall, now holding a controller and two pairs of headphones very solidly. Don't be lazy, follow the directions - clean your wall and let it cure for 24 hours and it will stay.

I am using this for my wireless headset and PS5 controller. I really like it, however have had some trouble with it sticking to the wall. It fell off a couple of times, which is a bit concerning since I have very expensive accessories on it. I was able to finally get it to stay by putting additional tape on it, but I am not sure how long it will last.UPDATE:Yeah, it fell off, again, and took down some of my wall with it... even with extra tape to secure it after it fell the first time. I’m gonna have to go with a no on this one :/

After about a month of use the adhesion started to come loose and I had to make a custom mounting bracket onto the wall to get it to stay there. Also this is just 3-D printed, so if you wanted to have one of your very own you can just look up the file to print this. Works as well as it does for the price I guess.

The only flaw I can identify with this product is that this looks fairly cheap. It's obviously a 3D print, which isn't the most attractive way to manufacture something like this, though the simple design is elegant enough that you won't be ashamed to hang it on your wall, either. Once you put a pair of headphones and a controller on it, it looks just like any other plastic hanger.The hook is exactly the right size to take pretty much any pair of headphones, ,the second hook on the top can easily support any game controller, and the small hook on the back easily supports a coiled-up headphone cord or controller wire, keeping your device conveniently displayed yet out of your way. Be aware that the hook on the back is really only big enough for one coiled cord. It *might* be able to fit both a headphone and a controller cord, but that would be pushing it to the limit, so if you need space for both, this might not be the product for you.The adhesive is quite strong and has held up with no trouble at all. I even tested it by applying some extra weight (far more than any controller/headphone combination) and had no problem either with the hanger itself or with the adhesive. It's now a permanent home for my headphones and one of my controllers, and it's shown no sign of weakening.I've noticed some other reviews have complained that the adhesive didn't work. While it's entirely possible that some people got a bad batch, I would point out that it's necessary to clean the surface before applying the hanger, and you need to make sure you wait until it's completely dry before attempting to use the adhesive.All in all, as long as you don't mind that it has the appearance of a 3D printed piece of plastic, it will work perfectly for you.

The controller rests on a flat surface, not snug or secured in anyway. I had to carefully position it so it would sit straight and evenly. It feels like a slight breeze or my cat brushing past it while walking on my desk will send the controller tumbling to the floor.Update: My controller fell on the floor while I inadvertedly and barely moved its cable. This "holder" doesn't do the one thing I was expecting it to, hold my controller.It did take a chuck of my paint and drywall off when I removed it, I should have used Command Strips to attach it to the wall.I will be returning it.

I stopped using it after like 3 days. I have a wired headset because I don’t like charging headsets every other day. Having a wired headset to my controller made it a hassle for me to use this product. Much easier to just leave my controller and headset on my table. If you are a really organized person, I would recommend this product. It is sturdy and does it’s job. The product didn’t really work well for me because of my laziness to unplug the headset and have wires dangling, and then unplug the cable for the controller. The product is great, but it wasn’t for me. Maybe, I’ll put it back up if I get a wireless headset.

Durability of the unit is ok. A little too slick and controller likes to slide off to the side when not perfectly nested. It also needs to be slightly deeper and wider for an xbox controller to fit well. The adhesive does not work at all. I cleaned my wall and tried to stick it on. I waited 24 hours and then put the controller and headset on it. Came back the next day and it was all on the ground. Tried again later on the side of a desk. Same results.

These are perfect and look nice. I was so sick of cords and controllers everywhere. These keep everything neat and organized and each player has their own. Thank you!

Right this product would be awesome if it actually stayed onto any surface, so far I’ve had this fall pressed this against a flat wall and chest of drawers afterwards as it feel of and damaged my controller analog stick. You need to have a better adhesive to hang this partner with command 3m never once had an issues hanging massive thing with less than you have used on this product. Returning as it’s awful and want compensation for a damaged my PS4 controller.

Very strong son mistakenly stick it on his draws the wrong way round now cant get it off

I had lots of problems on managing the accessories of my consoleDue to this I had to change my headphones twice in a monthBut this mount makes it a lot betterI can place both my controller n headset on the side of my desk by which it makes space management a lot easierPerfect for a PS4 controller n a headset along sideQuality of the product was decentN it has an adhesive which is really strongOverall gud n useful product

Somethings just make your life better.This product is one of them.Xbox controller fits perfect.Feels quite sturdy.If stick on a proper surface, the sticking power is more than enough.If had to pick, the only negative would be the edges are somewhat sharp. So hanging headphones with a leather headstrap might leave edge marks on the leather.Its a 3D printed item.Overall Purpose is served very well!

A good concept but cheaply made with bad adhesive strips. Glad I pleased it not so high above a soft surface else I would damaged some expensive headphones and a xbox one controller. It's not like the other quality products from the same brand