Heat Shield Insulation with Ties for Pipe 16' Roll Titanium Motorcycle Exhaust Tape Thermal Protection

I applied this on my car's exhaust (Toyota MR2 ZZW30) it was enough to cover the headers, the down pipe, and part of the Main cat. It was not difficult to apply but you NEED gloves and eye protection because the fiberglass strands are very tiny and could pierce your skin. I soaked the whole thing in water and it became a lot more manageable. The provided metal straps are not that good, you need pliers to tighten them and I used a Dremel to cut the remains. If you got the money, get better metal straps, if not, these work fine but you need to cut off the excess and they're a bit of a pain.Pros: After applying the wrap along with the factory heat shields there was a noticeable decrease in heat in the engine bay. You still cant touch the heat shields directly but inside the compartment there's less radiating heat. I also noticed how the speed of the gases increased and can be heard in the exhaust. Sometimes there's even a bit of backfire noise on deceleration.Cons: Tons of smoke on day one, had to run the engine for a couple of hours and rev it really high to let the wrapping get heated and release all the moisture. They also smell pretty bad on day one. After 2-3 days the smoke is completely gone but they still smell a bit. Everything is back to normal in around a week.Some people also say they can rust the exhaust if they get wet often because they hold moisture. I don't believe this because the pipes get so hot that I doubt they can stay wet for long. Still I applied high temp Rustoleum paint on the pipes before the bandages. I would recommend rust prevention or more expensive ceramic coating if you got a good exhaust system just in case. I didn't apply Silicon because the one I got is flammable, but you could try this as well to make them water proof. I still got my heat shields/covers and I avoid driving on the rain so I'm not worried.Good product, would buy again, Thanks!

I recently purchased the LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for my motorcycle, and I must say it's nothing short of spectacular! This heat wrap exceeded all my expectations and more.First off, the installation was a breeze, thanks to the stainless ties that came with it. The wrap itself is of top-notch quality, and the titanium finish gives it a sleek and high-performance look. It not only enhances the aesthetics of my bike but also serves its primary purpose exceptionally well.After wrapping my exhaust pipes with this heat shield tape, I noticed a significant reduction in heat radiating from them. This not only makes for a more comfortable ride but also helps in protecting nearby components from heat damage. The durability of the wrap is impressive, and it has held up beautifully under high temperatures and extreme riding conditions.What's even more remarkable is the performance boost I experienced after installing this heat wrap. My motorcycle's exhaust temperature remained more stable, resulting in improved overall performance. It's clear that the LEDAUT heat wrap is not just about looks; it's a high-performance addition to any motorcycle.In summary, the LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll is a game-changer for motorcycle enthusiasts. It combines aesthetics, durability, and enhanced performance in one product. If you want to protect your bike and enjoy a more efficient ride, this heat wrap is an absolute must-have. I couldn't be happier with my purchase, and I highly recommend it to all fellow riders out there!

The product is pretty cool. I like the color but when I opened it, the cross stitching it feels and looks like fiberglass webbing. I got the 50 foot roll 2 inches and I put half of it on my cold air intake and it works pretty well. It was easy to put on the metal zip ties worked pretty good I’ll like them, but I don’t think it has any titanium in it. It feels like fiberglass webbing pretty much but even if it is just fiberglass weapon. I’m sure it will still do the job

easy to use and looks great once you're done

What we have is a prime example of excellent product and a very reasonable price.

I’m a rookie at this but wanted to try wrapping some long tube headers for one of my projects. I did the first one dry and what a mess. The second one I soaked the wrap and it helped keep the mess down a bit but I don’t think there’s any way to get zero mess. Looked great when finished but will probably never do it again, I was rotten with fiber all in my skin (even with gloves). Every time I have to work on plugs or anything near it, if you touch it plan on your skin being irritated for a couple days. It did the thing for the heat, but at what cost lol. Not sure if this is just the nature of any type of wrap like this but that was my experience.

Didn’t even need to take off the exhaust did exactly what it said it was going to do , easy installation and an awesome fit, definitely helped with lowering the heat around you to prevent muffler burns real thick. I would say be ready for the fiberglass wear gloves and a long sleeve for sure!

I am writing this review after trying the product for almost 2 years, let me tell you that it will work perfectly for what it is described. I had a problem with my Ford car, the exhaust pipe would heat up the metal next to the seats and you could feel that heat on the soles of your feet even with shoes on. I used this product and the problem disappeared, it really is amazing.