Fahren 9007/HB5 LED Headlight Bulbs, 70W 14000 Lumens Super Bright LED Headlights Conversion Kit 6500K Cool White IP68 Waterproof, Pack of 2 (Blue)

*4 months in and theses are still bright as ever! I am so glad I bought these. Excellent value for the price. *Bought these for a 2002 F150.They are bright and work a lot better than I had anticipated. So for now, 5 stars.I will say that install them in this particular truck has a few steps that you must do. I could not post the pics yet of the install process. I will write out the steps though.1. Remove the standard bulb and keeper from the light housing. (Keeper- the ring you screw off that holds the bulb in place)2. Remove the adapter ring from the new headlight. (Black ring with blue gasket) Just carefully twist until the bulb (entire silver part) unlocks from the ring.3. Place the adapter ring into the headlight housing4. Screw the keeper ring over the black adapter ring5. Insert the bulb into the housing and twist until it is locked in place.6. Plug them up and find somewhere to stick the box. You're ready to go.There has been no flickering of the bulbs and the fans work. Fans are not horribly loud. They are audible when vehicle is off and headlights on.

Just installed these on my Ford Ranger 2004 Pickup and now I can really see in the dark. They increased my vision times three, I just love these LED bulbs. Very easy to install

I drove around with these for a week to make sure I liked them. Installation on a Dodge Ram 1500 was completely painless. I expected I might need a headlight adjustment after installing them but the lights were aimed close enough to where they were previously that it wasn't a problem.If you're installing them on an early 2000s ram, it's much easier to change the bulbs by pulling out the entire headlight housing. The instructions (pictured) are generic instructions so they don't really tell you how to do it. You want to take the two bolt out of the inside part of the light first, then get that lower bolt out so the light can wiggle, otherwise, you'll drop your wrench into the bumper cover. Once you have all three bolts out per light, give it a swift yank.The lights are well packaged. They come with a little power supply so it doesn't flicker like other LED kits, which is super nice. The lights also have fans on the bottom. Try not to crush them when installing the lights. Finally they have zip-ties included. It's supposed to support the little power box, but I didn't really have any place to put it. The zip ties were nice though because my old truck's plugs were all sorts of beat up, so I used them to secure the plug for the lights to the plug on the truck.The color is a cool white, it looks great. I included a picture from a parking garage during the day to show they were bright enough to be visible. They also draw less power than the old set of lights, so the battery is much happier.The box presentation is nice, everything is quite well packed. Wear gloves when installing them since there's no glass cover to wipe off if you get dirty fingerprints on the thing.

I gotta tell ya, I have never been so impressed by a lightbulb in my life. These things are Amazing! For the same price you would pay for Sylvania's best bulbs (which I have) you could get these instead and have the look of an HID conversion. The quality is outstanding with the perfect beam pattern, very well built with some weight to them...not your cheap retail store bulbs here. Installed in new headlamp housings with no problems in a 2002 Jeep Liberty Renegade that I purchased new. Wish they had these 19yrs ago! Very Happy Customer 😃

The media could not be loaded.  Easy install because I looked up some info before hand. Take note of whether the retainer needs to be before or after the bulb itself. So far no flickers and they hooked right up to the stock harness.2nd pic is low beams at 25 feet from the wall.2000 Exursion V10 Limited. ( non stock housing)

Okay, so I can not give a true review as of right now. So to start, right off the bat, the seller had these bad boys delivered promptly. Which is a huge plus. These are definitely plug and play for a 1996 ford ranger xlt, so that, I applaud.Now, unlike most of these other reviews, unfortunately only one of my bulbs is working, fresh, right out of the box. Plug in one, turn on your lights, if it works, try the other, before you install both.So, the one that is working, is bright, it is a very big upgrade for my old truck. With that being said, it is Saturday, December 5th, I have registered the warranty, and contacted the company for a warranty replacement bulb. This review will encompass everything from, installation, mounting the driver, wiring, brightness, pattern, and the most important, the all mattering customer service. Because if you are going to work for your money, and you spend it where it is valued, that is the best.Update: 12/13/2020I reduced stairs due to customer service response of 'our bulb isn't working because you need to buy this too.' After testing both bulbs and one being proven to be defective. Surprise surprise, I bought 'this too' for a dealership verified non canbus system, and low and behold, the defective bulb is wouldn't you know it, still defective! So, paying full price for half the product, and over a week of not being able to use the advertised product, plus the extra expense of pointless parts, let's see how long they take to honor their warranty, and if Amazon should really allow the company to sell their product on its platform.

The media could not be loaded.  Great product amazing quality better than my $60 dollar regular bulbs any day. Love these bulbs as does my company. They work great while giving you great visibility. They are great priced and come packed with everything you need to set them up. They are some of the best bulbed ive tried so far. Amazing quality amazing work great shipping everything to make this great and it passed all tests with a A+ will update as i drive with them to make sure they dont burn out fast or anything

I was disappointed with the Fahren LED headlights for a 2008 Ford Ranger. I tried everything to make them fit but due to their design, they could not be attached properly. A big disappointment as it clearly states on the Amazon website that the Fahren are designed to fit a Ford Ranger. This was a complete waste of time it took to order the product, wait 2 weeks for it to arrive, and discover they do not fit. Do not order this product for your 2008 Rangers!

For any ram/dodge owners out there these lights work really good on my 2004 only complaint is it will throw codes when the brights are on and when I turn my brights off they’ll flicker then go back to normal it’s livable but sorta annoying don’t think it’s a fault with the bulb these trucks are known for these issues but they do say it wont flicker but it sometimes does still your gunna need a decoder more than likely

Love the led lights for my 2007 Nissan Xterra! Had to go on YouTube to figure out the exact way to install them but it was a breeze! Took maybe 10 minutes altogether roughly. Feel safer driving with the bright lights!

I am extremely impressed with these lights! I've bought other brands of LED's in the past and was not impressed as there were issues with flickering or not making a difference between high and low beams. But these bulbs work very well. Super bright and work well in my new smoked lens headlights on my 1999 F-250 Superduty. The fans are quiet. Other ratings and feedback on these bulbs are what made it an easy decision for me to buy these. I am a journeyman mechanic so I don't pay attention to ratings from the inexperienced. I've attached photos showing how to trim the retaining rings to allow the wiring to relax and not rub through.Please watch the installation videos in the links or qr codes in the instructions that come with the bulbs before you try install them. It makes it allot easier to understand how and why to insert the retaining rings before you install the bulbs. Or try watching the fahren YouTube videos by searching for them.I love these lights so much I bought two more sets for my other trucks!I cannot give an honest opinion on longevity as I just bought them. Only time will tell!

Very poor installation instructions in miniature, after a couple of hours of trying to sort out for my Nissan Xterra 2008 I realized that the retaining ring is not the same as the retaining ring shown and had to be modified in order for the l e d bulb wire to clear and then the high beams would not work properly. Went back to my halogen bulbs and returned the product