This is a set of two RF shielding flexible materials with grounding cord for protection from smart meter radiation. Price $39.95 is set per linear foot of both materials + one grounding cord per entire order. MATERIAL 1. Nickel-Copper RF Shielding Fabric is REFLECTING RF radiation with vastly superior tarnish and corrosion resistance due to Nickel plating. Polyester ripstop base fabric for toughness and light weight. Only 0.08mm thick. Surface Resistance: 0.01-0.03 Ohm/sq. Because Nickel may produce skin allergies, this material is not intended for direct contact with skin. Protective gloves are recommended when handling this material. 42.5 inch wide sold by linear foot. This shiny, smooth polyester ripstop fabric is covered with pure Copper and Nickel coating. Light weight and flexible. Easy to cut and sew, like an ordinary fabric. It has superior tarnish and corrosion resistance due to Nickel content, and it characterizes with high conductivity and RF shielding performance. Note: Nickel may produce skin allergies - handle this material with protective gloves. The material is not intended for direct contact with skin. MATERIAL 2: Microwave ABSORBING material with plastic coating (both sides) for easier handling. Using non-woven nearly-pure carbon fibers, to achieve both good microwave shielding and high absorption this carbon material is conductive in some forms, and a very good microwave absorber. Application Notes: 1- Double or triple the layers of MW Absorbing Sheet to increase effectiveness. 2- To create a super high performance enclosure, you can combine a layer of this Microwave Absorber material with a layer of a high performance fabric shield such as Nickel Copper Ripstop (available on ). Line the inside of the shield with Absorber. It will scavenge any RF which might leak in. 3- Grounding is not necessary with this material. 4- Minimize repeated bending/flexing of this material. SOLD per LINEAR FOOT. NO RETURN WILL BE ACCEPTED AFTER 30DAYS!
Trustpilot
5 days ago
2 weeks ago
