ZhenT 10Pack Quiet Garage Door Roller,Reinforced Dual Cage,White 2” 13 Ball Bearing 4” Stem,Reuse More Than 100,000 Cycles

Replaced 20 year old metal wheels.

Smooth rooling.

I learned the hard way to losing top bolt in the just a little bit bracket holding roller and take the other 2 or 3 bolts out. Pull old roller out and put new one in. Don't do what I did , I took all the bolts out of bottom bracket and it took off like a rocket. If you leave 1 bolt in that should not happen. I still had a squeak left after installing rollers when door was almost fully open . With the door all the way up I adjusted top roller and that fixed problem.

Pretty easy to install the first four down from the top of the door, but you must be very careful with the bottom two as they are under a load from the springs, I have the springs along the rails and I was able to remove the cables when the door was fully open and the cables were not under a lot of pressure. Very good wheels and the noise went down a lot.

They glide so smooth compare to the old hard plastic. I am so happy one roller broke because I would have never changed the rollers.And by the way you must change all of the rollers because the remaining rollers are much smaller due to wear.Trust me I am cheap and when you figure it was $7 for 1 and $20 for 10Mark the bracket with a pencil so you align back to original spot.

They make a big difference on the noise level. As far as installing, you need to know what you are doing, or consultant a pro, or there are a few good utube how to do videos out there. Beware of bottom roller, works with spring, stored energy.

We only needed one but ordered the 10 pack and wound up changing out all ten, it made the garage door very quiet, we didn't realize how loud and noisy it was until with installed these rollers.

I replaced my old rollers on my own and these were very easy to install. Unfortunately I was missing 2 rollers from my pack but Amazon fixed the issue. Great quality, definitely helped reduce the noise and are a great value. If you are considering doing a DIY repair, gets these.