Bipod, 6.5-9 Inch Lightweight Hunting Bipod for M-Rail,Directly Attach to The Rail

When installing this bipod, do not tighten the MLOK screws beyond snug. The screws are really crappy, and the socket heads strip easily.The legs fold a full 180 degrees, allowing them to be collapsed and pointed forward or rearward. When rotated for use (set 90 degrees to the muzzle), the legs lock in place via a retractable pin which is trapped by the teeth of a fixed gear. This pin/gear fit is not tight, so the legs have a little play, but the motion is limited to front-rear movement. Other than that, the bipod overall is relatively tight, and the front/rear movement is easily secured with the use of a rear sandbag.The shortest bipod setting fits my AR 6mm ARC perfectly with reduced capacity mags, allowing just enough space below the pistol grip for a bag. And partially extending the legs easily gives enough room for full capacity magazines.Nice little bipod, and at a very reasonable price.

Just got it out of the box and my initial reaction is positive. For the money, I am pretty pleased. In case you are wondering, there were no instructions in the box. However, if you can’t figure out how to mount 4 M-lok attachments, you probably have bigger issues. The legs look identical and were not labeled, but there is an allen wrench included. Build quality seems pretty good. The legs can adjust to 45*, 90*, and full forward or rearward. Push button detent worked well, legs extended easily, and they locked positively into each notch. I did not experience much wobble, but these do not tilt, so that makes sense. I am not sure if the feet can adjust to compensate for any tilt bias as a result of manufacturing tolerance. Mine seemed to be leaning just a hair to the right. I will try to post an update after I get it out on the range.

I rough handled the bipods to see sturdiness and durability. I had to tighten the hand guard mount knob few times, but bipods extensions themselves were very sturdy. After about 100 rounds, I could feel a bit of looseness on the hand guard mount. Perhaps I did not tighten the knob enough. I am satisfied with product and I think I got my money worth out of it. But I cannot speak on its durability. It is a bit heavy and adds weight to the weapon.

I have 3 of these and have had no issue what so ever with them. One is on my AR10 (.308), one is on a Howa 1500 (6.5 Creedmoor) and one is on my Bergara B14 BMP (.308). Sturdy and firm. No regrets on purchase

The unit seems sturdy enough though when legs are fully extended they wobble a bit when unloaded and the tightening knob can't be tightened enough to make it as sturdy as say the Harris dispite using O- Rings as noted on a video. There is an aftermarket device that you can use to wrench down the knob....but that adds to the overall cost. At the end of the day I'd say its ok but if I had to do again knowing what I now know.... I'd pass.

The detent plate for the legs has a significant gap from the main body. Even if you tighten them down to the point that you can barely deploy, It wobbles. The knob used to secure position is oversize for the location. It is difficult to get a secure grip to sufficiently tighten.

I’m a strong guy and there is no human that can tighten this enough by hand to make it not lose and swivel constantly. The buttons to swing the legs down are very stiff and the legs are hard to extend. The thing it’s just so dang frustrating to use, and I just have it on a .22!

Arrived fast, works great

So far I've only put it on a .22LR rifle as my larger ones don't have M-Lok but it holds up to a full day of shooting after hundreds of rounds and it's very easy to use and comfortable. My one complaint is it's a bit awkward locking the swivel, it feels like it's already fully tightened but you have to tighten it more. If I get a higher caliber rifle with M-Lok I'll see if it survives.

These are cheaply built, don't cheap out on your attachments it isn't worth it. The screws deformed so easily and I had to pay a gunsmith to remove the bipod. Expensive mistake.Edit: I have edited my review rating due to the seller reaching out to me and making the situation right. I will likely give their products another try in the future but will still avoid anything with too much hardware like screws as my initial review indicates they're poor quality and resulted in me losing $90 for a gunsmith

Looks like a winner and is shockingly well-built for the price! Good adjustability, mounted quickly and easily. When it’s folded the whole thing is quite compact against the stock, which was important to me. Haven’t found any of the fasteners to be loose like other reviewers however if they become loose after some usage I’ll just loctite everything. The only things I would change would be to add a rubber overmould to the tightening knob to make it a littler easier to manipulate with bare hands, and maybe also anodize the silvery bits black, but neither of these things are dealbreakers by any stretch. Don’t hesitate, you won’t be disappointed!

Had these installed on my 6.5 creedmoor.... for about 5 minutes. They they are flimsy and wabble even when fully retracted. They install easily as do all m-lok products. Just glad they were as easy to take off. Save your koney and spend a bit more for a better quality set.

Bought this for my Sig Sauer Cross .308 because I could not get a Magpul. Works fine and stays in position when carrying or when using the sling. Good value.