AMVR Touch Controller Grip Cover, for Meta/Oculus Quest, Quest 2 or Rift S Accessories,with Anti-Throw Straps and Handle Protective Sleeve,Made of Premium Material, Comfortable Feel, Easy Installation

This is a good affordable grip. The best feature are the straps that allow you to play more freely. You can do throwing motions with confidence. The straps are soft and stretchy. They hug around your hand which makes it comfortable and secure. I like how they come in other colors so you can color code for each hand. The excess strap can be rolled up and rubber banded if you don't want to cut it. The vr headset graphics on the strap are tacky. I would have preferred some kind of pattern instead.The grip is comfortable with a nice smooth texture while being durable. The controllers fit inside snug and fit. You can still use the safety strap that came with your controllers. Ergonomics is good but not perfect. My nit picks are the ring and pinky finger imprints don't align with my grip. It would have been better without it. The location of the S,M,L slits could also impede your thumb while you feel around for the thumbstick. You can slightly twist it out the way a little if that bothers you. Don't get me wrong, these are just minor nit picks! The grip is really comfortable and I'm definitely going to keep using them.The only extra accessory that is useful is the lens cover. It fits perfectly, just make sure you put it on correctly. The proximity sensor should not be covered by it. Don't bother with the nose pad, it doesn't block much light unless you have a large nose. The flaps are not long enough. You might as well get a face cover with a built-in nose flap if that's what you're going for.Would I recommend the AMVR grip? Yes of course. I believe these are the best affordable grips out there. It's probably not worth the extra cost for the more premium grips. These work just fine.

I've been using the AMVR Touch Controller Grip Cover for a few weeks now, and I'm very impressed with it. It's a great way to improve your VR experience by making it more comfortable and immersive.The grip cover is made from a soft, rubberized material that provides a better grip on the controller. This is especially helpful for games that require a lot of hand movement, such as Beat Saber or Half-Life: Alyx.The grip cover also has a built-in knuckle strap that helps to keep the controller in place. This is great for games where you need to make quick movements, such as in VR shooters.In addition to being comfortable and functional, the grip cover also looks great. It comes in a variety of colors to match your VR headset, and it has a stylish design that makes it look like it belongs on the controller.Overall, I highly recommend the AMVR Touch Controller Grip Cover. It's a great way to improve your VR experience and make it more enjoyable.Pros: Comfortable and provides a better grip on the controller Built-in knuckle strap keeps the controller in place Looks great and comes in a variety of colors AffordableCons: None that I can findOverall:The AMVR Touch Controller Grip Cover is a great value for the price. It's comfortable, functional, and looks great. I highly recommend it to anyone looking to improve their VR experience.

These are without question the best grips for the updated Oculus controllers I have tried, and I've tried several.I will start with my one complaint, as it's the only one I have, then I'll get to why these are the standout choice for me.That complaint is battery replacement. Because these grips slide over the battery cover, they have to be removed to replace the controller battery. We all know how short the Touch controller's battery life is, so you can see why this might be a little tedious. But the real inconvenience is the velcro fastening at the top of the grip. One of the reasons these grips work better than most is that they anchor on the tracking ring of the controller in a very solid way. But with that anchor in place, they can't be removed. So there's a frequent dance of unstrapping the velcro, sliding the cover off swapping batteries, sliding cover on, and replacing the velcro.I realize this was a very challenging problem to solve for the designers, and they ABSOLUTELY have done the best job of any I've encountered. But a future update might swap the velcro for something like a clip that snaps around the tracking ring and can be released with a bit of effort.An alternative might be an ultra-premium model with built-in rechageable cells (potentially with larger capacity due to the grip size) that replaces the battery and cover entirely. It could include either USB C ports or use a charge dock (though USB would theoretically allow use while charging).That aside, I love these grips and continue using them because THEY WORK, unlike the rest I've tried.They work better because:That top-ring anchor system that makes swapping batteries tedious also means this grip is much more solid and consistent in fit than others. IT also allows the grip itself to anchor to the controller solidly in a separate way from the strap. That leaves room for the upper strap anchor to be adjustable, which means a better fit for more hand sizes.I'm probably a worst-case scenario for these grip solutions, as I have small hands with long fingers. With all the others I've tried, I end up with either a loose strap that doesn't do any good, or a strap that holds my hands in a position where my fingertips are now placed far past the triggers, leading to an uncomfortable claw grip just to keep the controllers fitting snugly.But with these grips, I can use the lower grip position for a tight fit, and it still falls either right in front of or behind my knuckles, both of which put my fingertips right on the triggers. The fit is also MUCH more snug but also more comfortable as a result, and they're very easy to adjust while playing--though I don't often need to adjust them.These grips are also very nice in that the straps lie flat against the controller when not in use, so you can quickly pick up a controller and start using it without even using the strap, and then easily swap to using the strap if needed. I like this versatility a lot, as my VR usage ranges from very relaxed or controllerless games (Elite, flight sims) to intense grip-based games like BoneWorks or Half Life Alyx.And lastly: the slight thickness and scultping to these grips adds quite a bit of comfort to the controllers. This may vary with hand size, but even the small indents for the bottom two fingers are very noticeable, and the grip texture really does prevent sweaty-palm grossness.If you want a "knuckles" style grip for your Touch controllers, this is the one to go with. It's far better finished and polished in its design, and it offers far more adjustability for more use cases than the competition.

I saw someone use similar VR Cover grips on their Quest Pro controllers, although designed for the Quest 2, so I thought I’d try these AMVR grips with my Quest Pro controllers. They work well!They are a simple design you just slide the controller into. It’s a snug fit and very secure. They come with a loop to go over the Quest 2 controller halo but it’s not needed with the pro controllers.They come with two sets of elastic side straps and a lens protector thrown in. Initial testing has been great, they are comfortable and don’t add any significant weight. As you can see they fit the charger but you do have to be slightly more precise.At around £17 they are good value too.

tout est dans le titre

MI è arrivato un prodotto usato, all'interno mancavano anche degli accessori. Di per se le custodie sono anche buone ma Amazon deve smetterla di spedire per nuovi prodotti usati.

Amazing was a good purchase dont regret getting it idont know what to say its amazing and worth every buck

After trying out and returning the Kiwi Designs ones because they didn't fit me well, I have a lot to say about these ones in comparison.These things are awesome and I feel like AMVR really thought of everything. They actually feel better for me to use than the original controllers, which to me is the mark of a good accessory.It offers 3 different positions to attach the strap, and then the strap is adjustable in length to accommodate different sized hands. It also is elastic so it has some give. You can trim off the excess, and they have provided guide lines for that, but I'll be keeping the tails on them for when others use them. They put a line across the back of the strap that makes it stick to your hand so it doesn't slip. Even the printing in the straps is quality done, getting several passes to build up the ink.I like that they include 2 sets of straps. Either white, or a red and blue set so you can differentiate easily between the remotes. If that wasn't enough the grips themselves are labeled L and R which will be helpful for new or guest users.The grips feel awesome. They textured the grips and also shaped them for your fingers which make them feel great to handle. Also the handle extends beyond the length of the original remotes which is a nice feel in your hand, especially if you have larger hands.I appreciate that they also included extra pieces, like straps, spring clasps, and velcro attachments. In addition you get some free accessories like a lens cover and a nose light bleed piece which for me didn't really do anything, but I have a small bridge and nose. Even the box it came in felt premium with fancy spot gloss and full colour. I could see it on the shelf at Best Buy and would feel good giving this as a gift.All in all, I'd say AMVR did a great job with this product. It feels like a quality accessory.