CORE TOOLS CT110 Hydraulic Brake Bleeder

Works better than vacuum bleeding! The only knock is the fitting was not solid on the nipple. Used a silicon hose with the included clamps and I was good to go. I have an electric parking brake on my jag, so a pointer for you if you are swapping calipers or have air, make sure you roll back the brakes and rest them before bleeding. Also even if you have this, you'll want to elevate your bottle above the caliper to prevent bubbles. Also do it with you engine running if you have ABS to ensure a full bleed. Also follow manufacturer recommendations on bleed order. Simple, cheap and made it a one man job.

Works great! I would suggest if you haven't bleed the brakes in a while to open bleeder and press brakes a few times to get the big debris chucks out or it will clog the tool.

I had to replace the clamps because the provided set won't properly grasp the bleeder valves on my Subaru or my Volvo, leading to messy blowouts. Once I replaced the clamps with a better set, I really started to like the bleeder and honestly wonder how I ever bled brakes without it. Unlike other reviewers, I haven't had any issues with the ball sticking, but I make a point to clean it out with brake cleaner after each use. A tool like this needs to be kept clean if you're going to use it for any length of time.

Worked great at first but after bleeding 2 cars the ball started sticking. First the hose blew off the caliper and the clamps that they provide were hard to fit over my bleeders. I had to use vice grips/wiggle and noticed it beginning the slice through the plastic hose. It's a good idea and I liked the fact of being able to see air in the fluid- therefore needing further bleeding. But finally the ball stuck open in the valve so essentially it functions like a hose. I tried banging it on metal and will attempt to soak it in PB Blaster overnight and see what happens. Also please make sure your bleeders are not leaking around the threads- when this hose worked correctly I found a stream of bubbles flowing from one and put sealer on it. Too bad that I missed the return date by 2 days otherwise would exchange in case the next one was better.

I haven't reviewed a product in a while, but this stand-put product deserves one. I have bled dozens of brakes, using vacuum tools, adapters and nothing has worked as well as this simple device. My motorcycle has ABS which makes brake bleeding more complicated, but this bleeder made it fast and efficiently got the air out. No need to seal the threads on the bleed screws, no small reservoir to empty repeatedly, and no need for an assistant. The lines are sufficiently long and include spring clamps to keep them in place while pumping the master cylinder. Money well spent.

The best one man brake bleeder tool I've used so far. Hose section before and after the check valve lets you see the color and air content of the fluid as you extract it from the brake system. Also lets you drain to a pan or a larger bottle that won't overflow like the tiny brake bottles that come on the store bought kits.

This product is great, but short lived. Must be careful to watch that it will not slip off after first use. It did on me, and I had to redo the entire system because it fell off allowing air to get into the system. The key is to make sure the tube is dry when you place it over the valve. The clamps are not large enough to use on my truck's bleeder valve, but if the inside of the tube is dry it will stay on there. Could also buy larger clamps if needed. Overall I am pleased with the product. I was actually able to bleed the system myself on two different vehicles with it.

So far I've bled 8 brake calipers with it. My only complaint is that the hose is almost too small for some of the nipples, but it seems to still work! I'm not sure about longevity since I've had to really stretch the hose to get it over some of the nipples, but for 10 bucks it's sorta hard to knock off stars for not including extra hose sizes. I'd readily buy another and I really like this product. Stupid easy to use.

Handy little device perfect for when you're working alone. Worked as advertised. They only problem I had with it was the spring clamps for the hoses. They were fairly difficult to work with and kept slipping off the pliers. I had a spare set, but I would recommend replacing them right out of the box.

Arrived very quickly, used it today on my motorcycle, worked great! It made this challenging task much easier to do solo. After removing a bunch of stuff for access, flushed & bled the clutch system completely in about 5 minutes.

Works great. It would be good if a longer tubing would come with it. Works really well.

Kind of a pain, I put on speed bleeders they are awsome, best thing i ever did, one man job now👍

Works great, not really any need to prime it. Bleeded my clutch lines and it was a breeze. Will use it next time to bleed my motorcycle brakes.

Works very well on my motorcycle, simplifies the task when working on your own.

As described

Bled the front brakes of my bike quickly and easily. Works like a charm.

Worked great, but wish it came with twice the tubing.

Works well and great quality

Good