Specifications: Input voltage: AC 220 V, 50 Hz. Flow rate: 0.6 l/min (~ 7 MPa) - 5 l/min (~ 7 MPa). Working pressure: 290PSI - 10152PSI {2Mpa - 70Mpa (700bar)} Oil capacity: 7 litres. Motor power: 750 W. Motor speed: 1400 rpm. Machine size: 360 x 280 x 440 mm (14.2 x 11 x 17.3 inches). N.W. : 28 kg. Instruction manual (English 1. Before oiling, open the filling nozzle, the electric pump and the power connections, then press the black button next to the motor to open, press the hand control switch (up), after a few air pressure, press the hand operation turn off the motor (down), and connect it to the hose. (The pressure should not exceed 63Mpa at air pressure to avoid damage.) 2. Open the motor after the pump has been connected to the device, and bring the operating valve to a pressure position after the engine has been turned for 1-2 minutes. At this moment, the hydraulic oil comes into the cylinder to carry out the work, and the output of the hydraulic The oil increases to 63 MPa with the load of your own amplifier. 3. The regular working temperature of the oil pump between 10℃~50℃, if it is found that the oil temperature ≥70℃ should no longer be used after continuous operation under high pressure, let it self-cool before use. 4. The pressure of the pressure relief valve and safety valve was set before the pump leaves the factory, the user can not increase the pressure randomly, it could only reduce it according to the actual working pressure, which can improve the service life of the pump station. 5. The engine must be reliably earthed. Our products are delivered from European warehouses.
C**D
Excellent unit
Great value and good flow rate not too fast to allow monitoring of bending folding and punching equipment
Trustpilot
2 months ago
2 weeks ago
