🔧 Connect, Create, Conquer!
The HiLetgo 2pcs Xbee Adapter offers a robust solution for connecting your Xbee modules to Arduino with dual power output options of 3.3V and 5V, ensuring compatibility and ease of use with USB 2.0 protocol.
M**J
TX and RX labeled incorrectly (swapped)
J**E
Rx and tx labeled wrong.
The Rx and tx pins are labeled wrong, also if you're using an xbee with sma connector it will hit the serial pins. Otherwise these work fine for me. No trouble with the USB interface, just took a bit to figure out the mislabeled pins.
J**E
poor quality
3 of 5 units had the XBEE socket filled with solder and would not allow the chip to be plugged in.
I**N
You might want to try a different manufacturer.
I bought 2 of these; one transmits, but doesn't receive. The other refuses to be recognized by a PC (and I've tried several PC's), and you can't update the USB drivers for it. I've used several XBee USB adapters before (from other manufacturers), but these were so inexpensive, I figured I'd give them a try. Wouldn't buy them again!
S**
Counterfeit FTDI Chip.
Looked like a good board, but to bad they're using counterfeit FTDI chips so you can't program it using ft_prog software from FTDI. For my intended use, you must be able to invert the TXD and RXD to use the board. So the 6 boards I've bought are useless.
Trustpilot
2 days ago
1 month ago