Homak 24-Drawer Parts Organizer, Black, HA01024152

I'm very happy with it. I feel like I got what I paid for.Pro's: The description is spot on. It's a light weight, wall mountable, plastic container with clear drawers. It's strong enough for light to medium duty. Mine currently has 11 lbs of hardware in it and I have no worries; it'll have double that before long). The drawers slide well and are easily removable (even when significantly loaded).Con's: At the price, none.Nit-picks:The back panel is (mostly) glued on and it's fit is less then perfect. Strongly suggest laying a bead of super glue across the seam before hanging it. Even then, you're probably going to want to reinforce it or put a shelf under it.It doesn't have a mould label. If it did, it could be a selling point. If I were to guess, I'd say it's probably made of high density polyethylene, but that's a guess.If you're worried about strength, sunlight, or chemical resistance, buy a metal storage solution. If you want cheap, look no further.After purchasing one and filling it, I bought another. The wife stole the second one. I bought two more. The wife has staked her claim on them and they haven't even arrived. I purchased two more.... I'm not telling the wife.I may rattle can them to add chemical/UV protection and add a front door panel. Adding metal (Erector set) reinforcement will be a must for mounting.The guy using it as a Raspberry Pi cluster housing is my hero.

I looked at several parts organizers before I bought this one. Many of the others had drawers that were kind of free floating and would go out the back as well as the front of the rack and would fall out easily. However, The Homack parts organizer is a better design. Each drawer sits in its own little compartment in the frame and there are two little pegs just inside the front of each drawer to keep the drawer from accidentally pulling all the way out of the compartment. However, if user wants to remove a little drawer, it can be tilted up and removed (like if you need a lot of that particular screw or nail and just want to take entire drawer to project). Very easy to re-insert by reversing the process. Frame is hard plastic with four mounting slots in back in case you want to mount on wall. It is also very durable for sitting on shelf or work bench. This organizer will allow me to consolidate screws, nuts, bolts, washers, nails, picture hangers, shelf brackets, etc., in one place to make them easier to find and eliminate all the mess from little packs and partial boxes.Update: I did not realize how many different sizes and types of screws, nails, bolts, washers, etc, I had. I will be ordering a second Homak parts organizer for additional parts. I like the depth of the drawers. It allows storage of many pieces in each drawer and plenty of room for fingers to reach in drawer to extract needed pieces.

I bought one of each organizer, the HOMAK 18 drawer and the STACK-ON 18 drawer that cost $20.00 less at $19.95. I have them both in front of me with tape measure and scale. Both are identical in dimension down to the drawers. The more expensive HOMAK says made in China and the STACK-ON says made in USA. With the exception of the back of the unit, the castings are identical! The drawers are made of the same slightly flexible opaque plastic that is adequately strong for moderate weights. The drawers on both units weigh the same and look the same and both contain one drain hole each. There are slots for dividers, but no dividers. The drawers have stops at the top that will stop the drawer from coming all the way out. The drawers remove easily by tilting up as you pull it out. The Stack-on drawer has a recycle logo on it. The main difference in the units is that the HOMAK unit's frame has been reinforced on the back. It has a 1 inch wide border of plastic that goes around the entire back surface of the unit and includes mounting holes in each corner. The STACK-ON unit is only re-enforced at the top and had two mounting holes. The HOMAK is black and the STACK-ON is grey. In functional tests, the better reinforced HOMAK unit seemed to flex less with weight. It was also evident that it might be better suited to mounting to a wall than the STACK-ON unit. However in my situation they will sit on a shelf and either seemed to be adequately constructed for that. In summary they are both good units depending on your intended purpose. If you are going to stack these units on each other, or hang on a wall then consider the HOMAK. If they are going to sit on a shelf, then the lower cost STACK-ON is adequate for less money. I give the HOMAK 5 star for construction and 3-star for price value, while I would rate the STACK-ON 5 star in price value and 3 star in construction. In my situation, I will purchase the STACK-ON in the future and save the money!

Didn't notice when it arrived as the drawer fronts looked okay. However, 4 of the large drawers are badly warped (twisted front to back) I doubt they are very usable. Very disappointed with productand will not repeat the mistake of ordering on line. Will go to big box store so I can kick the tires so to speak. Suspect the drawers were twisted while still hot as they won't straighten out even with severe twisting and application of some heat. Warp appears to be molded in.

I chose this product because I was do a massive reorganization project in my home. I was searching for organizers and storage systems for every section including my office. To be honest, i was misguiding by the dimensions and was expecting a larger storage system to use in the office to compartment my office items. Instead, I received this smaller item. However, it worked out perfectly for my smaller items. The plastic compartments are durable, easy to pull out and replace. Now finally , all my small stuff such as pen, pencils, glue, paper clips etc etc are all neatly packed on the top shelf within easy reach on my desk. I love it. Shipment was delivered on time. No problems.

Delivered as expected and no damage. I replaced an older drawer system with this one. The old one was great,however, it dropped, broke and I had to replace. This one has more drawers and I really like the number of larger drawers. Offers great storage options. Priced lower than smaller units locally. Get it, you’ll be happy with it.

Gracias muy buen producto!!!!!

Muy buen articulo y llego un dia antes

Excelente material se ve durable los cajones no se deslizan solos , fácil de empotrar muy buena compra

Los cajones son muy pequeños