NZXT H710i - CA-H710 i-BR - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Vertical GPU Mount - Integrated RGB Lighting - Black/Red

I got the H710 model, and put in it: An ATX board, GTX 1060, a hard drive (regular size?), 240mm AIO cooler, and 650w power supply.Pros:- It's solid metal and glass, and feels well made.- Lots of cable management opportunities, whether you choose to use them as intended or not. I appreciated the options.- Works with water-cooling. As another reviewer mentioned, once you remove the top, the piece underneath is a reversable bracket that can accomodate a radiator when flipped upside down.- Tons of space. It was bigger than I was expecting, only because I realized what I thought was a "mid tower" was actually a mid compact tower, and this is a true mid tower. Everything fit quite comfortably.- The power supply is compartmentalized, which is both nice for cleaning up the look, and also a slight pain when routing cables. I believe the bottom is removable though, which I didn't do and might have made this easier.- It's really easy to pop off the side panels- I hear nothing out of this case (though not doing any overclocking or anything crazier than some FPS video games)Cons:- The instruction manual is pretty lacking. It's just a pamplet that unfolds into a big double-sided sheet, with a bunch of wordless diagrams and reference letters (that you have to refer to the other side for). It was mostly decipherable, if you could find what you're looking for.- I found the removable "bracket" piece to be annoying and took it out. I tried putting it back in at the end and found that it cramped the 24 pin power cable for the motherboard.- Like other reviewers have said, getting the top and front off is a bit annoying because of all of the little clips you have to squeeze (pictured).- The thumb screw that allows you to pop off the glass panel is close enough to the tab you use to pull that even with small fingers I could barely twist it by hand (pictured).- There's a wire on one of the front fans that never got tucked behind like the others. It runs over the corners of the middle and top fans and then joins the rest of the cables. Not a big deal, I could just take the fan off and route it properly, but just a small quality control issue.All considered, I would definitely reccomend the case. Most of the cons are really pretty picky, and I do love how solid it is.

My case was almost perfect. The only build quality problem that I had during my entire install was that one of the screws holding in the hard drive case stripped, but the 3 other screws were fine, so I just wrenched down a zip-tie in the last spot. I'm perfectly happy with this case.What I needed:1) Sound dampening. I wanted a case that balanced airflow with sound dampening, so it remain be cool without being too open.2) Looks. My wife hated my old Cooler Master HAF, and honestly I don't need that big of a case today, so I wanted a good-looking case first and foremost.3) Filters. I just bought a house and we have a cat, so between dust from renovation and cat hair, the filters will get a workout.As of writing, the NZXT H710 was one of the top cases on the market for my particular set of needs. I was referred to this case by the YouTube channel "Gamer's Nexus", who rated it as a solid case when it came to running quiet with stock airflow - exactly what I wanted.Pros:-Minimalist design doubles as sound baffling. The top, front, and sides are almost entirely flat and metal or glass. This means a lot of sound dampening. The unit also has standard rubber feet, meaning with the right build this could be a very stealthy computer.-Beautiful interior shown off with a full glass panel. When properly routed and lit, this could be a gorgeous box. Mine will mostly be hidden under a desk, but once in a while I'm going to need to haul it to an area where it's seen, so this is nice.-One-button removal of front and back panels. The front panel actually comes off with just a pull as it's friction-fit, and the back panel is a one-button operation. I hope more cases go this way. Thumb screws are nice for long-term storage, but when I'm working, this ease is appreciated.-Plenty of routing for cables. I'm not a cable guru so I'm fine with a rat's nest inside so long as the main airflow channel in the front is fine, and in my case the only cables really showing are the motherboard power connector and the extra power for the graphics card. It's hard to avoid those.-All air intakes have wire filters. The power supply air filter is also externally mounted, so it's easy to clean.-Plenty of upgrade space. There's a ton of fan mounting options. There's a ton of space for a graphics card (I think it's rated to 16"?). The power supply space isn't even rated - it fits anything on the market if you slide back the hard drive cage far enough. It has 5 slots for 2.5 hard drives on quick-swap trays that can be screwed in for safety, and "2+1" slots for 3.5 drives - with the final drive bolted on top of the cage. This will will hold pretty much any ATX build or smaller.-Plenty of fans. The case comes with 3 fans up front and 1 in the back to pull air across the motherboard. I'd suggest everyone upgrade as I did with a couple 120mm fans up top to help draw air up and away from the hot interior. Some "silicone screws" aka fan standoffs would be a good idea for sound dampening.Neutral:-Airflow comes from grates that run along the sides of the computer, at the top and front of the side panel. Essentially all the intake and exhaust air is being sucked from behind the giant, flat faceplates. This means if you're going for an extreme airflow design, you'll actually create more noise from how hard the case will be sucking air, and you should look to something like a mesh front instead. This case does better with low-to-medium airflow designs, such as someone who's not planning to overclock their processor beyond what the stock fan can handle. Personally, with my totally non-overclocked build, airflow is as good as it ever was in my HAF case.-Not a lot of ports. You get three USB-C ports, including two of the rectangular A style the oval type C. There's also one TRRS aux port, and the case comes with a splitter in case your headphones and microphone need separate ports. And that's it. Just 3 ports on the whole front panel, so you need to rely on your motherboard slots. Personally, I use a USB hub for most of my devices anyway, so that's not a big deal.-Price. A lot of people in the current market are talking like this case is expensive. My old case was a Cooler Master HAF that retailed for $200, and this case is way less expensive than that. To get a modern case, that looks this good, for cheaper than my old case, is fine. Maybe it's not industry-leading, but it's fine.-No front drive bays. Most people don't need optical drives anymore, but if that's a concern for you, you'll need to add an external. This case has a metal front panel, so you're not adding an optical drive without power tools.Cons:-Must remove the front panel to get at the front filter. The front panel comes on big plastic pegs. You'll have to open up the case and fight them a bit getting the panel off. That could be a hassle for someone with a lot of pet hair problems and needs to wash the filter frequently. I'm currently in a house with one shorthair cat, so this is maybe a twice-a-year job for me. I'm fine with that. Note that the power supply filter is externally mounted.-Smart Device. I don't care about LED, so I totally ignore the "smart device" feature. If I wanted LED, I still hate the current field of controllers - most of which install spyware - so I wouldn't use this anyway. Most people say it's terrible.-Build quality really is so-so. I've seen people have problems, but I myself only encountered one single screw stripping on the hard drive cage. The other 3 screws are fine, and that unit sits on the bottom of the case, so it's not like it's going anywhere. I zip-tied that last side in place just so it won't rattle. I'm happy, but definitely but definitely keep your receipt for returns just in case.Overall:For my particular preferences, this was one of the best cases on the market. It's got good sound dampening, and it looks great, without compromising airflow. If you have other priorities - such as high airflow thanks to overclocking, or not being concerned about sound dampening, you might prefer other cases. For me, this is a great case, and I'm totally happy.

This is my fourth time building a PC but the first time using a good case designed for good looks, airflow, and cable management. The build went very smoothly and cable management was easy with the case's design. This is the first build where I never felt like I was going to cut my fingers on sharp metal. It's really nice that the case comes with four fans pre-installed. They are audible, but reasonably quiet.One note: the top plate that AIO coolers/fans connect to can be flipped over to provide more clearance. Without flipping it my AIO fans wouldn't fit over the heat sinks in the motherboard, but once I realized I could flip that part I had plenty of clearance. Also: it is a little nerve-wracking removing the front and top panels (which you have to do to install AIOs or fans in the top) but just follow the directions and you'll be fine. It takes a bit of effort but they pop right out. I installed a Be Quiet! 240mm AIO cooler but this case supports 280mm and 360mm as well with mounting options in the top or front.There is plenty of room for big chonker GPUs (I was lucky enough to score an EVGA RTX 3070 FTW3 Ultra *NOT from a scalper!*) and it is pretty large. Case airflow seems to be very good - even when my system is under heavy load, the system temp sits around 45 degrees C.Lastly, it's pretty! The plexiglass plate and cable-hiding bar give it a really great look, and I'm in the process of sticker-bombing the rest of the case to make it mine :)

Es un gabinete muy elegante y se ve muy bien por dentro y por fuera con materiales de la más alta calidad, el smart device sirve de maravilla para controlar todos los ventiladores que quieras ya que trae 3 puertos con sus cables de 3 entradas (puedes controlar 3 ventiladores por puerto) todo muy bien en cuanto a diseño...Lo malo es el flujo de aire, si tienes el gabinete en un lugar cerrado donde casi no entra aire se van a calentar bastante tus componentes al jugar o al hacer renders, este gabinete está diseñado para tener 2 radiadores (uno para el cpu y otro para el gpu con el kraken g12) no lo recomendaría para tarjetas de video que solo usarán ventiladores por lo mismo del flujo de aire tan pobre.

Outstanding case. NZXT knows how to make a PC look and feel premium, and also maintain good airflow. I loved the cable management channels, straps etc in the back and it made the PC building experience a treat!Highly recommended!👌

This case has all except rgb it has lots of featuresCable management , fans, proper airflow., and thinness wow it is too heavy you cannot lift easily you can feel the heaviness... I am satisfied with that...

Dayum shes a thicc beast. Looks great (even better in person) cant wait to get gpu finally to test her out

Yes it's expensive , yes the air flow is not THE BEST , but it's not as horrible as the online reviewers make it sound , it can accommodate a 360mm rad on top so temps really isn't a issue , I'm running a 4.8 oc on my FX processor and have no temp issues , the cabinet is a dream to work on and has all the required cable management accessories that is required ....