Allfix Touch Screen Display Digitizer Complete Assembly for Apple iPad 3 3rd Generation A1416 A1403 A1430 + Home Button Menu ,Adhesive and Tools White

Come with everything you needed to replace the screen. Before you put it in, make sure the button match with your old screen. My is not the same so I had to reuse the old button. However, it does came with the middle frame spacer bezel. What a pleasant surprise. Make sure you push the connector all the way in, pass the white line if possible and don't forget to remove the clear protector inside the touch screen. Test it first BEFORE remove the adhesive cover. I have no problem with it response, double character typing, no ghost like demon possessed iPad. 😂 I replaced 5 screens last year, and this is by far the best of the bunch (except the home button not match). I am not sure which seller include the bezel, but my did came with it. You may want to ask them before you buy.

The Digitizer went on fine and the bezel and preinstalled adhesive were excellent. Everything installed fine. Once I took the screen protector off of the front after I got it installed I noticed a difference between this screen and the factory screen. In this screen you can see the digitizer grid on the screen. Also, if you look at an angle and slowly tilt your ipad you can see the distortion in the screen.In addition the performance of the digitizer was less than I expected. The screen has a tendency to jump around as if you touched something that you didn't touch. There isn't any consistency in the performance from one time to the next. It's quite possible that this screen is more susceptible to foreign material on the screen such as fingerprints and smudges. I keep my screen pretty clean but it's not 100% smudge/fingerprint free.If there wasn't the issue with the screen randomly executing commands that wasn't given it would be acceptable. At this point the usability of the Ipad has been reduced due to this problem. I think I will try another screen and change it out.

this iPad 3 screen product came in a nice looking box and tools.... However the quality of the screen is poor... Had done many screen replacements from iphone, ipads, Samsung, even laptops ... this is far the worse screen I had received... After I had replaced the screen, I simply run my thumb around the edges and to lightly press the screen so that the glue tape will make contact and hold it in place.... CRACK!!! sounded from the corner! then comes off the small pieces... it was thin and brittle.. Not Recommended .

I was very pleased with this product. The pre-installed home button, camera bracket, and adhesive were great! The included tools were more than adequate and worked very well. The screen worked great after installation. One note to help with the installation: The white marks on the digitizer cable did not disappear when they are fully inserted as they do on nearly all the online guides that I watched.

Easy to use, nice package. Only issue, the home button didn't work on my 3rd gen iPad, replacing it with the original solved the problem. A warning about this would have been useful. I suspect the home button was for gen 4.Removing the glass was the difficult part and You Tube Videos, help with technique. If you're techy and patient, you can do it too.

Looks good tools worked out perfect. Only issue was the bottom tape just won't hold, has a small area under my home button that just won't hold. I left a 15 pound plate on the iPad for 24hrs and it eventually pops back up. 😤 other than that all was good. Maybe a little glue gel would help.

OK.... looked on youtub for examples. My screen was broken into little tiny slivers, which took about 45 minutes to remove. Once removed, and cleaned, the new touch screen went in very easily. Very happy with this, and fast delivery!

Worked Great. Quality product. If you know what you are doing you wont have nay problems installing. If you have never done a replacement, find someone to do it for you.