MakitaFD10Z 12V max CXT® Lithium-Ion Cordless 1/4" Hex Driver-Drill, Tool Only

Although the majority of my power tools, all my power tools are cordless, are in the 18v class; I have some 12v Makita CXT tools to compliment my 18v lineup.Before continuing, let me state I have purchased this drill/driver myself, I have not been offered a fee for this review and so on. In short- the opinions within, in addition to not being scientific, are my own and only my own.My experience is the 12v lineup compliments my 18v lineup very well. Just this summer I assembled two large swing sets for close friends and repaired a third that had been handed down after 10 years of use. In assembling and repairing - I often found grabbing the 12v drill driver was preferred. The combination of having the necessary power and battery life for installing fasteners in a smaller profile and lower weight meant I wasn’t as fatigued after driving 500-750 screws into some of these play sets. Sure if I was a tradesman and perhaps used to driving hundred of screws each day- perhaps the weight of an 18v driver wouldn’t be something I was so unaccustomed to- but I am not and on 90+ degree days and in the sun for 12-14 hours; every advantage was welcomed.What was also welcomed was those benefits, less tangibly, meant better results. Not only is using an 18v hammer drill driver to install 100- 1” outdoor screws for cedar plank flooring overkill, the weight leads to fatigue and fatigue, by extension, worse results.It was also convenient and faster having multiple drill/drivers, impacts and wrenches on each job. I didn’t have to change bits each time I ran into different size fasteners and drill bits. The CXT Driver was used mostly for 1” to 1-1/2” Phillips and Robertson screws and 1/8” to 1/4” drill bits (for pilot holes). 12v was also preferred for the smaller 3/8” hex fasteners and even the 1/2” bolts. The 18v subcompact and regular drill/drivers and impacts were used for larger 1/2 holes and several 7/8” bolts to secure the main beams.And as my preferred platform for hanging pictures or assembling flat pack furniture; the 12v CXT stores compactly in my hall closet, ready for action.In conclusion this is a well built tool with equally impressive performance that you’d expect from Makita. I found excellent features, smooth operations and performed well up to the parameters is is designed for. I have no hesitation saying that for many tasks on a job site- this driver would perform admirably.

Excellent screwdriver for its intended purpose. Overall, Makita is my favorite power tool manufacturer, followed closely by Milwaukee.

This is mainly for those looking for a direct comparison between the Makita 12v driver and the DeWalt sub compact 12v driver. (The new 12 model, not the old one) I'm a professional cabinet builder furniture maker, so this is from my perspective in that line of work. I also operate both systems because they each excel in different tools, so I have no bias between the two.Ergonomics:. Both are nice and easy to handle. The Makita is slightly lighter, but not by much. The biggest thing for me is the size. The DeWalt is more compact, so if you need to get into tighter spaces like I do, then DeWalt wins.Power. Again, DeWalt wins, and by a lot. The Makita works well enough if you're just using it for small hinge screws and predrilling holes. The clutch works really well too. If you're needing something to do more than that, I would go with the DeWalt. It has vastly more power. I was honestly surprised how much more. I could barely driver a larger diameter 2" screw into plywood with the Makita, the DeWalt zipped it in just fine.Cost. Makita wins. But not by much.Overall DeWalt wins, which is why I just bought my 3rd DeWalt version of this screwdriver and I'm returning my Makita ones.If you're on the Makita platform and simply need something small, then go for it. It's a good tool if you don't need to ask much of it.

Just what I needed for some light duty uses around the house and for assembling flat pack furniture. Feels good in hand and the LED light is very useful.

Nice, lightweight drill/driver. Great for 95% of household projects. Easy to handle. Won’t have the torque for the very heavy tasks. This is my new go-to tool to replace the discontinued Mikita 9.6v drill that died on me after 15 years.

The compact size and lower weight makes this the right tool to use when I don't need the power of a LXT tool but need something stronger than a Dremel or Makita DF012.Since I already have a CXT/LXT charger and CXT batteries this was an easy way to gain a new tool.

My old 1/4 driver died after many years of service. I decided to buy the Makita because of its reputation features and price. When it arrived I realized I made the right decision. It is solid and the quality is obvious. The trigger can be feathered nicely for slow speed and the clutch controls are metered correctly. I’m happy with my purchase. My co-workers are also happy with my purchase. After using it they are purchasing their own Makita driver.

My tools make me money, and this lil bad boy has already paid for himself ten fold. Very lightweight, and perfect for what I needed it for. Highly recommended