Tung Oil Finish

This works well for reviving the finish on bare wood furniture. It gives it a nice, rich matte finish. It can be used as the only finish when refinishing bare wood. The finish is fairly durable but you still want to be careful not to get it wet.

Excellent product. Easy to use, great result

I used this for a full wall of mahogany cabinets in my primary bathroom. It is a good finish. Just remember to use a buffer after the final coat is dry. It will bring out the finish nicely. Also note, this is NOT 100% tung oil. This is a finish which basically stays on the surface of the wood. If you want true Tung oil, the dry/cure process is 30 days minimum, but it is way stronger and water resistant because it penetrates deep into the wood. So, make sure you figure out what you need. Also, I don’t recommend putting this tung oil finish on wood that pure tung oil has already been applied to (and vice versa). The finish just peels right off. Sadly, I speak from experience. But, hey, I learned a lot! ;)

We have a wooden vanity surface with a raised bowl type sink, so we want to make sure the wood is well protects. In addition to the finish done by the cabinetmaker, we applied a coat of this. I thought it was going to be like oiling a wooden surface, but it's more like a clear coat matt finish that hardens. With just one coat, I get the feeling water would have a heck of a hard job ever getting at the wood. The coating made the wood look even richer. And then I also use Pledge over the top of that, just because I can. The Pledge adds it an even silkier feel and still richer color. Wouldn't need that last step, but why not? :-)

I've been using Tung Oil for years to refinish gun stocks and fine pieces of wood furniture. And mostly I've been using Minwax Tung Oil. But this product -- Tung Oil Finish -- is not the same thing. Which I discovered only after buying and using it. Tung Oil has a somewhat syrupy consistency and is applied in multiple coats, allowing time for each coat to dry. Usually about 24 hours. Tung Oil Finish is a thinner product containing additives and can be applied in one or two coats, or as a finishing coat to the Tung Oil you've already applied. It's a good product for what it is, and if you've already applied true Tung Oil, adding this finish to your project will give it a nice shine. But if you are a perfectionist as I am, don't be misled: All on its own, it will not give you the same kind of finish you expect to see in quality woodwork.

Excellent for finishing wood projects…. 3-4 coats and a little rubbing between and you will have an excellent finish.

Tung oil is great for wood projects that require a better but natural finish. I use in on cane's, wooden barrels , tools. It goes on easily. It smells better than linseed oil. It cleans up easily. It will moisturize your wood, provide protection from water and keep it in good condition for years.. It’s a good value

Love Min Wax Tung Oil Finish. I REALLY love how the seller packaged my shipment. The can of Min Wax Tung Oil was placed inside of a sealed plastic bag to protect against leaking. Plus, the lid of the can was taped shut to insure no leaks. The seller went to a level few others do.. I appreciate that. The price was right, too.

This is real oil and works great with wood. It took a bit of time to get it, but it worked fine.