MAX 5 MIN A/B - 5 Minute Set Time Epoxy Resin, 16-Fl.Oz Kit, Low Cost Bulk Kit, High Adhesion Strength, Toughened, 1:1 Mix Ratio, Fast Repair for Bonding, Gap & Void Filling, Strong & Waterproof

This epoxy works very well in filling voids, especially if sawdust is added to it. I used it with sawdust to fill two large vacancies where knots in red cedar had fallen out and it filled the holes great. It takes a finish well. The open time is as advertised: you have about five minutes to do your fill before the epoxy begins to firm up. The major drawback is the cost. At around $60 for the two bottles it gave me pause but, unless you mix saw dust and yellow glue to fill large voids, the epoxy results in much better fills that are less noticeable when finish is applied.

Decent. A little cloudy if used with any depth.

Be prepared, goes off quick!

easy to use .......... sets up like a rock

First off, their definition of 5 minute epoxy is that you have 5 minutes of WORK time, not 5 minutes until its cured. Second, you can't layer it until its fully cured. Third, it takes overnight to cure. Fourth, it has poor surface adhesion (at least to plastic). In short, its NOT even a shadow of what you're expecting from a 5 minute epoxy. PASS

Exactly as expected

I was very disappointed when the product yellowed.

Great product. Just what I needed. I tried a different brand but it came loose when I performed self cleaning on the oven. But then used this epoxy to glue a modified washer to self cleaning door switch to create a flange because original switch flange broke away. This expose held at around 500 to 600 degrees, inside oven. Well see if it continues to hold as I use the self cleaning feature to clean my barbaque grills. So far so good.