5ft x 6ft (30 Sq/ft) 3M GLOSS Black G12 Scotchprint Car Wrap Vinyl Film 1080 Series by 3M

Was interested in getting dash of 68 Camaro refinished without having to mask off small visible sections of welded in dash. The vinyl wrap was perfect and I was able to do both sections in under 30 min with no overspray or masking concerns. Very pleased with results and no one will know it’s not paint.

Ok a little backstory first... I have a 8th gen Honda Civic.And for those that are familiar with them, that's probably all I have to say. But for everyone else who doesn't know, these cars are notorious for the clear coat failing on the roof. After years of thinking that I dodged that bullet it finally started to fail on my car too. So since I could not afford to repaint my car I figured a vinyl roof wrap would be the next best thing.And long story short this stuff is amazing.For someone who has never done anything like this before, and with no more training than watching a couple of YouTube videos on the subject I actually managed to end up with a very passible final product. This vinyl ended up being very forgiving to work with which definitely saved me as I absolutely screwed up my first couple of attempts to install it. However at the end of the day after much sweating and cursing it actually turned out great. I'm sure a professional could have done it in a fraction of the time and it would have come out absolutely perfect, but for my needs I couldn't be happier with the final product. I would not hesitate to buy this vinyl again for future projects. It is by far a superior product and worth every penny.***Update***Roughly three years later and the vinyl on the roof of my car was starting to show some wear. Then I recently made the mistake of trying to wax it, which almost immediately made it look drastically worse. Still even going into this I knew it I knew the vinyl was a temporary solution, so I find it hard to complain. Also for what it's worth I also wrapped the chrome grill on my car shortly after I did the roof, and that part is still looking perfect. So even though I have heard that you can apply wax to the vinyl, apparently it might damage it or at least leave a nasty looking residue.

I’m a newbie when it comes to wrap. I bought the gloss black 3m wrap. I wrapped a motorcycle fairing and I was impressed with the quality of the wrap after unsticking it many times due to mistakes by me. It was a good buy

I originally painted the trim on my Z a nice glossy black. The problem with it is...about every 2 years, I have to repaint it to repair the little dings and chips the trim will get from driving the car every day. I used this vinyl to wrap the trim around my windshield and around my T-tops and I am very pleased with how it turned out. This product is easy to use and as all 3M products, is professional grade. If you've never worked with vinyl before, you might have someone who has worked with it to help you, as it is not an easy task. You can't just gorilla palm this stuff on...it has to be finessed or it will tear. The surface also has to be prepped properly and you have to use a plastic body filler squeegee in order to press the bubbles out. I am pleased with this product and will purchase more in order to do the trim on my other Z.The picture I've included shows the newly covered lower trim. To the left and immediately to the top is the painted, uncovered trim. You can see the chips in the paint and the rusty bit on the top left portion of the bigger piece of trim.

Very easy to use especially if you have some experience. Looks good overall, material finish has slight orange peel up close. But that’s just 3m wrapCons:the tape that holds the roll together rips off the clear protective film on the wrap when you take the tape off. They just need rubber bands on the rollsHad slight creases from being bent but came out with some heat.Would recommend