EleTab Dual Monitor Desk Mount Stand - Premium Aluminum Articulating Full Motion Computer VESA Monitor Arm, Heavy Duty Holds 2 Screens 17 to 32 inches, up to 17.6 lbs Each

Straight out of the box, this dual monitor mount was almost perfect. The instructions are clear and concise, although not really needed as the product is extremely intuitive to assemble. I love how the monitor mounts have a clip that simply drops into the arm so you can attach the VESA mount while it's lying on a table, unlike my other mount that you need three hands to mount the monitor to the arm (i.e. huge PITA). Once both arms are installed and monitors hung, only VERY slight adjustments to the spring pressure via the included allen wrench were needed. The monitors are surprisingly easy to maneuver into their final position even with the set screws cranked down.Speaking of set screws, the only flaw I experienced were the holes for the two set screws on one of the upper arms were not fully threaded. The set screws were therefore jammed in and wouldn't fully seat. Thankfully I had a M6x1.0 tap on-hand and finished out the faulty threads. The other upper arm's threaded holes were perfectly threaded...Overall, 9/10. If it wasn't for the mis-threaded holes, this product would have easily been a 10/10. This replaced another manufacturer's similar dual monitor mount that I also purchased through Amazon and I can honestly say that the other mount doesn't even come close to comparing to this mount.

If you have limited space Beware! I hate to give the product a bad review because I really did like the EleTab Dual Monitor Desk Mount Stand - Premium Aluminum Articulating Full Motion. The problem I had with it...was space needed. From the pictures I thought I would be able to move the arms around enough. In my case I had it mounted to a bamboo Uplift desk. Unless I had the displays way to high for viewing I needed about a foot of open space behind my desk. Since I have the desk against a wall in a smaller bedroom it was less than optimal to have the whole desk a foot away from the wall. Even with the desk pulled out about a foot I was still hitting the wall with the back of the display arm. Product quality was great, good looking and easy to install. Not sure if I was doing something wrong, but I would say the cable mgmt was the easiest piece to clip and unclip.

I previously purchased a Dual Monitor Setup from another brand a few years ago. I only ever used the stand for one monitor because my I liked being able to move my gaming monitor into different angles depending on which game I was playing. So, I had a dual monitor stand that I only ever used for one monitor.Enter the EleTab Dual Monitor Desk Mount Stand and I finally understand why it is important to have a stand that allows you to articulate the monitors any which way you want. Setting up the stand took under 20 minutes from start to finish and then another 10 minutes or so to get the alignment set up how I wanted.I'm excited to have more room on my desk where I used to have a monitor stand and I can also comfortably move the monitor up and down/back and forth/and tilt it without having to worry about it readjusting. Additionally, the cable management is surprisingly good when you conceal the wires underneath the plastic guard in the monitor arms.The only con to the setup was trying to determine how tight I needed to make the monitor arms so that they would support the weight of the monitor while also allowing it to be moved. This is a small price to pay considering it took under 10 minutes of fine tuning to get it all to my liking.Please ignore the cables on my desk as they are not from the monitors but just how I run my headset and keyboard.

I really like these dual monitor arms. The main reason I chose these over other monitor arms is because of the clamp style to the desk. Other systems use a hand tightened screw from the bottom of the desk to secure the base. This system used a 6mm allen screw which allows for much more leverage to be applied for tensioning the base to the desk. I find this system to be very secure. Assembly was easy and I had the entire system up in about 10 minutes. The range of motion is good with these arms. However, if you have your desk against the wall as I do, you will not be able to put these monitors side by side or flush with each other unless they come forward quite a bit. Flushness can be achieved but for my desk (which is 32 inches deep) it puts the monitors a little too close for my liking. I would like to have them flush toward the back of the desk. This is just my preference and I am still really happy with this system. One other con I have noticed is the arms started squeaking quite a bit when I move them. I think this is from the springs being under tension and am unsure if it will resolve itself as the springs break-in. It's not that big of a deal since I don't move my monitors too much, but it is worth noting. All in all, I still give this system 4 stars as it performs well and holds my two 27 inch monitors without issue.