SKSGermany Shockboard XL Front Bicycle Fender

OK - this one really works / wide enough for most tire sizes. Ok - maybe not fat tires. Lock and install works great. Very solid.

I am using this 'XL' version on a 29" mountain bike. The installation was super easy. Just select the one of the four clamp barrels that is just a bit smaller than the opening up into your steering column, insert bolt and nut, stick it up the column, then tighten the bolt, and that is it. The board installs by sliding it into the grooves of the installed part and clicking it into place. Removal is done by pressing the orange button and pulling the board out. This could not be designed better, IMO. The board also looks great. It works very well. I often ride in a fairly muddy park (summer in Florida!...;-), and I did not get hit by one drop of mud in the face since installing this board. Awesome! It does flex and vibrate a little bit while riding in rough terrain due to the single mounting point, but since it is made from a sturdy plastic, there is no noise associated with this, and it does not bother. I just ordered the matching board for the back. Great brand!

Does the job of keeping me dry. This was the only way I could get a fender on my bike because my bike doesn't have any eyelet holes to attach to the rotor. It installs by shoving a little adapter up the part of the bike where the handlebar meets the front fork. Very easy to install - under 10 min. My main complaint is that they give you 4-5 adapters so you can fit it to your bike, but there's a ~3 millimeter difference from one size to the next, and I was between two sizes so I couldn't get it to stay on. They should give you a little rubber shim or make the adapters adjustable down to the milliliter so it fits every bike. I solved by putting a rubber band around one of the smaller adaptors, but the fit still isn't perfect so the fender tends to get skewed every couple days. If you have eyelet holes on your bike, you can probably find a better fender, but for me this was the only option I could find and so I can't be too picky.

SWEET. I have a Schwinn mountain bike. Pretty standard. I got a Schwinn carrying rack on the back, so the mud/rain from the back wheels stays off my back. I wanted a light front fender. This is perfect. It mounts and dismounts easily. It comes with multiple split barrels. I was confused how much they expanded so I tried to slide in the one that would not fit. The I put in the one I thought was too small and it expanded very well to tighten in the tube. The attachment of the fender to this mound is just a very secure clip. I can take it off easily. Wonderful and now I can ride the bike in the rain and not get splashed. Great product.

Easy to install. Works very well in mud puddles and rain.

Had used the normal shockboard on my MTB before, this is a good 4-5" longer underneath with better coverage. Had to jeririg the mount with tape to get it to fit my rockshox fork, the given adaptors didn't match. A little photographer's tape to widen the adaptor worked fine and it's set firmly. Quick release works great, slides on and off in a few seconds.

The product works well to stop water from coming up from the road and onto the rider.

I have a hybrid with moderate, medium width tires. But, the fork was too narrow for the fender. Tried to modify the fender to make it work, but could not be done and still retain adequate fender rigidity. Finally had to give up on this and use the existing setup.

Ich habe den Schutz bestellt, da meine Tochter es irgendwie geschafft hat,den am MTB verbauten Spritzschutz ab zu brechen.Es sind alle benötigten Befestigungen in zwei Größen dabei. Der Halter ist schnell montiert, einfach die für das Lenkrohr passende Größe zusammen bauen, von unten in das Lenkrohr stecken. Durch das festziehen der Schraube wird der Halter gespreitzt und somit im Rohr geklemmt.Den Spritzschutz von vorn aufschieben, fertig.Beim ersten bestellen habe ich das Set für vorne und hinten gekauft, es hat 5 Jahre bei normaler Nutzung gehalten, wie gesagt musste ich den Schutz für vorne nachbestellen und würde es auch wieder kaufen, weil ich von der Haltbarkeit bei normaler Nutzung auch im Gelände überzeugt bin.

I like SKS accessories, they are a bit pricey for a piece of moulded plastic but they do have style.Only 3 stars because the photos don't describe how this fits to the bike. It is a simple bung that fits in the hole under the front fork like a cork in a wine bottle with a clip on the end you clip the mudguard intoThe bung is very small (15-35mm) so flip your MTB over and measure the diameter of the hole under your front forks before ordering.I had to wrap a rubber shim around mine so it would stay fixed inside the hole.This type of cork in a wine bottle fitting is the same as the cheap Chinese mudguard set I bought years ago so am a bit disappointed it isn't sturdier. Cannot complain about style and quality of the mudguard.

Love this fender and it works ok on my giant gravel bike. You have to twist it a bit and then jiggle it into position, but it works for me. Clever mount from the bottom of the steering shaft, and then a clip, i used the longer one. so far so good...

ステアリングコラム内に固定するパーツがすっぽ抜けないよう工夫が必要だと感じます。ゴムシートや滑り止めシートを使って固定することをおすすめします。3190円の価格ですから文句などありません。破損したら再度購入するつもりです。・一番左の写真この２つのどちらかを車体に取り付けます。両方試してみましたが長い方を選びました。どちらでも問題なくマッドガードは取り付け可能でした。・左から２つ目の写真円柱状のパーツをステアリングコラムの内側に固定します。周囲に滑り止めシートを巻いてからステアリングコラム内に挿入しネジを締め込むと円柱状のパーツが広がりステアリングコラム内に固定されます。円柱状のパーツはできるだけステアリングコラム内に納まるギリギリのサイズを選び抜けないよう滑り止め対策をしないとすっぽ抜けると思われます。・左から３つめの写真滑り止めシートを巻いた状態この状態でステアリングコラム内に入れ固定しました。どんなに引っ張っても抜けない状態に固定できました。・左から4、5番目取り付け完了この部分にマッドガードを差し込みます・左から6、7番目マッドガード取り付けるとこんな感じです。29インチ、タイヤ幅2.3インチ。

Das schutzblech war super einfach montiert und macht einen hochwertigen und stabilen Eindruck