Black E26/ E27 Light Sockets, Retro Edison Lamp Holder with E26 Medium Screw, 200℃ Heat Resistant Standard Screw-in Lamp Socket for Vintage Edison Bulbs Pendant Lamp (8PACK)

The threads could be a little tighter on the shade ring, but I have 1 order already installed with another order coming, using for grow lights, not 1 bad one yet, very happy here.

a little bulky for a lamp cord, however good quality

Changed out our light fixtures and needed this piece to secure our glass shades. Took measurements and worked perfect for install.

In general, the socket is good but little too small to attach a light shade (most light shades have 1 5/8" openning). It should have another socket ring to hold shade in place.

I needed to adapt some existing pendant light to fit these new open weave shades. The new sockets installed easily and fit the hole in the shades. Inexpensive fix for a remodeling problem.

I was expecting super cheap, flimsy stuff, but it's actually nice plastic castings, durable, and even nice screws in the base. One tiny drawback... when you put the base in the housing and screw it closed, the housing doesn't hold the base in tightly. There is a little play. Not really a big issue, especially in something like a pendant or a floor lamp, but in my case (repairing a handheld work light) the floppy bulb is a bit annoying. Five stars because they are really nice and I doubt too many of you are fixing work lights.

The plastic outer socket, and all the parts that screw together seem solid and well made. Everything fits together well. I also like that the thread out of the back of the socket is a standard 1/8" pipe thread, so those hollow threaded rods they usually include with light fixtures will screw into these perfectly, which really gives you lots of mounting options other than hanging them by their wires. What I don't like is the metal socket within the plastic base is a really loose fit, and there's nothing that can be done to tighten it up. If you're hanging these lights by the cord, this won't be a problem. If you're attaching these into a lamp, or, as I was hoping to do, use them for a custom ceiling fan light kit I was building, you're not going to like them, because the bulb will always feel loose/wobbly. The metal socket (that the bulb screws into) basically floats inside the screw-together plastic components. The metal socket can't twist, so there's no issue getting a bulb in or out, but there's a good 1/8" of play in all directions, so the bulb can flop around, even if it's screwed in tight. In my ceiling fan, with a slight vibration from the fan, this was no good. I thought about adding a few drops of glue, but was concerned about the heat. Overall, if you're just looking to hang these by the wires, they're a pretty good value, you get a lot of these for a little money, and they're otherwise well-made. But, they didn't suit my needs.

Ordered and was very happy they were good quality and easy to assemble

Delivered quickly for that vintage looking base , sockets are loose within the base as no hickey is there to provide a tighter seal ... My quick fix is to place an appropriate o-ring over the socket to make up the void but it's not required for safety reasons , I just like a bulb that doesn't move around in the base after it has been screwed in

Tenía mis dudas sobre la calidad, pero la verdad es muy buen producto, la calidad del material y los acabados son muy buenos, totalmente se los recomiendo

We have to send ours back. Our electrician won’t touch this as it’s not legal.