Universal Communication Headset Adapters for Accessory Rail Equipped Tactical Helmets

Came in fast and was as described. Works great on my helmet. Just enough tension to muffle out the noice and not to much that it hurts my ears.

Absolutely garbage. These do not work as advertised and won’t even slide on the rails. None of the tips provided fit walker razors and if you use the walker razor tips they slide right off the adaptors. Returning for refund.

I had lots of trouble finding adapters to fit the ARC rail on an Opscore helmet with the Howard Leight headsets. This product works great right out of the package with no adjustments. It provides ample pressure to keep the headsets in the proper place which was the main issue with other adapters I have tried. I have only had them for a week but happy with them so far.

(1) To install Sordins to a helmet clip the flat part of your adapter wires so they will slide into and down the adapter properly.(2) You also will need a special tool to undo the external retaining clips. This tool is called the "snap ring plier"I learned the hard way.

Tips have to be cut so the fittings will fit. Also not very tight on head due to design of the clamps pushing against the helmet. I would return if I didn’t need these ASAP.

First set was a little rough and didn't fit but they made it right and they work very well now.

Wasn't sure wether to leave 2 or 3 stars. Could have gone either way. I purchased this kit to mount my MSA Sordin headset to my bump helmet. Looked good coming out of the packaging, but found several issues when trying to install them. First, the aluminum adapters that mount the wire hangers to the actual headset didn't fit. The holes in the adapters where the wire goes in were too small. I had to drill them out. Second, the flat spots on the wire hangers needed to be ground down or the whole thing would be loose and ill fitting. Third, the wire hangers them selves were about 5/8 of an inch too long. I will also have to find some way of adding extra retention to the plastic mounts that fit into the ARC rail on my helmet. If you pull on the headset once mounted to put it on, the plastic mounts can pop out of the rail. I know these aren't very expensive, but I expected a little more for $65. Just be aware you will have to modify these in some way if you intend them for anything more than just show.

The media could not be loaded. DO NOT BUY THIS PRODUCT! When I bought this product I expected the bare minimum and I was still let down. I had 3 expectations for this product when I bought it.1. To hold my impact sports without rotating2. To stay in place TIGHTLY on the helmet3. To hold my impact sports up.This product failed all of them.1. The left one too easily rotates, but the right doesn't. 2. It is easy to move with a nudge, and 3 IT DOESN'T EVEN HOLD THEM!My main complaint with this product other than it being $50 for some reason is that IT DOESN'T EVEN HOLD THEM!You see when they were making this product they had the bright idea of not testing if it. Y'know... stays in place??? There is no excuse for this because they simply could've just designed the same metal pieces to hold the brackets as the literal one with the headset. Let me explain. The headset has a dip it in so that if you turn it at a 45 degree angle it can come out. The adapters on the other hand have them rotated 90 degrees so you can LITERALLY JUST PULL THEM OFF IN THERE NORMAL POSITION! This is absolutely unacceptable. Making them literally unusable.