Camco Heavy-Duty Cooler Cart Kit, Includes Durable Straps and 12-Inch Wheels, White (51798)

I just received my order today so I can’t comment on durability etc but I typically will come back and edit reviews if I find an annoyance/issue. So if this post doesn’t have any edits, it’s probably because I haven’t found anything worth coming back to edit for.Cooler: Yeti 45qt.Now to get to the good stuff!INSTALL/ASSEMBLY:The product was super easy to install...I was impressed! I will say, the video on this product page was easier to follow (nothing was wrong with the paper instructions, I just preferred the video). Only tool needed was a hammer or mallet. The kit supplied an Allen wrench that is needed for the bolts that hold the axle pins in. I was also surprised the hardware included locking washers. I recommend paying attention to what side you install the wheels on. I installed them on the side with the drain plug so that I can easily lift the other side to drain water out.QUALITY:Almost all the pieces feel very durable and well thought out. My one complaint here is that the cambuckle straps feel pretty then and cheap. I’m not too worried about these though as they are relatively inexpensive to replace if they go bad. Metal is thick and welds looks solid. The wheels are quite large but I like them! They roll very smoothly and don’t make the cooler sit awkwardly high off the ground on one side. Overall, the setup feels very sturdy when installed.Update 1/15/2021:These wheels are still holding out strong! I get questions and compliments on them all the time. The straps that came with is have been fine holding out despite initially feeling cheap. Highly recommend!

Ordered for my Yeti 75. Easy enough to install, but the cinch straps were a little tricky to get nice and snug. Seems like there's got to be a better way to hold the wheels on than these push nuts, but they do the job. The wheels are a great size, bracket feels super solid. I'd recommend investing in an extended handle to complement this kit, it's definitely a little awkward to use. Make sure to mount the bracket on the end of the cooler with the drain plug!That's about all the downside I can come up with. I used it for a beach day immediately after installing and it was a lifesaver. Much easier than carrying the cooler, and makes it a one-person job. I'll be using it frequently over the summer, so if there are any durability issues I'll update my review. I don't expect that, though, this feels pretty solid.

A few things about this Camco Heavy-Duty Cooler Cart Kit. Its wheels are large; perhaps a little larger than I anticipated, but they are very functional. Installation is a snap, although it may depend on your type of cooler…more on that below. It’s supposed to come with a long and a short strap, but mine had two short straps, hence the reason for my four-star rating. However, you can tell by it’s feel, weight and appearance that it’s made with quality in mind. My 12-volts electric cooler looks great as well and it’s much easier to drag around.I used the Camco Heavy-Duty Cooler Cart Kit, on my Kohree 12 Volt Refrigerator Portable Car Fridge, which I also bought here at Amazon. This cooler does not come with wheels and doesn’t have the means to attached them without a small modification. I will add about the modification to my previous Kohree 12 Volt Refrigerator Portable Car Fridge review but will attach a few pictures here with the cart kit already installed so viewers can get a few ideas.I’m happy with the purchase and I recommend it.

Love this kit! 65 qt RTIC is heavy when full and this makes it super easy to move around. Highly Recommend.

So, I saw ZERO reviews on this kit being installed on a regular type cooler. Every review here was all about how amazing this kit was for the super expensive Yeti, Artic and Igloo fancy coolers that are supposed to keep ice cold and intact until the end of time.However, we have a 7 year old 150QT coleman cooler that was a fraction of the fancy coolers cost and works for what we need it to. The only draw back to this huge cooler is that it always takes 2 people to move it around when fully loaded because it weighs about as much as refrigerator....until now.This kit was about 1 inch too narrow with the biggest axels. So after a quick trip to Lowes and some handy work, i was able to make this kit fit my huge cooler. No more needing 2 people to move it around, no more scratching and damaging the bottom from pulling it around.The ONLY reason I'm not rating this kit 5 stars, is the price point. $50 is reasonable, $75 is a bit much, but worth it in the end.Parts required for increasing the axel's widths, see all photos for reference:2 x 5/8" hex nuts to fit around the axels and space out the wheels.2 x 1.5" machine screws (about 1" longer than the ones that come with the kit) to attach the axels to the black support braket after the .5" axel widening.1 x box of #14 x 1" self tapping metal screws to PERMANENTLY attach the black metal support bracket to the bottom of the cooler.

Installed on RTIC 65. Used the wider axles and have good clearance on both sides.Wheels are solid, not spoked like the pictures on the product, the box, and other users. I was slightly disappointed as this makes them look much bigger. Wheels have the brand RHINO, which was unexpected to be different than the product brand.Metal frame was damaged, but I need it right away and have no time to return the product.Straps are not good and made of the very loose nylon strap material.Axle caps are frustrating to install as they don't sit level on the axle end easily to pound them down.PLUS: It does significantly reduce the weight of hauling the cooler over the ground vs. trying to carry it.Moderately disappointed overall.

Funciona correctamente el sistema vale la pena....

I really liked the build quality - Good wheels and bearings. My Pelican cooler will much easier to handle now.

Compré este accesorio para Yeti Tundra 45 , quedó increíble !Trae una excelente medida, es un ahorro considerable sin aumentar el precio de la hielera

I thought i was taking a risk from ordering from amazon warehouse. But i was wrong the item came with good packaging and it works well on my yeti 65 tundra. Its a great addition to this heavy cooler

Seems to be strong enough for heavy cooler but the way it attaches to the cooler is a bit cumbersome…..