12 Outlet Power Strip Surge Protector

Works great. I reversed the ears so that the plugs are facing the inside of the rack. It comes with 4 cage nuts, screws and washers, ready to be mounted to your server rack.

Great product. Good value. Fits well.

Not much to this product, but it does exactly what it is supposed to do. Fits and works well and looks well built. Note the outlet orientation. I had some "wall wart" style power plugs that covered 3 other outlets. You may want to look for another power strip if you run into the same issue with 90 degree turned outlets, or you will need some adapters.

I needed a couple of simple PDUs for providing power to the dual PSU devices in my lab and these worked great. The cords are sufficiently long to reach the UPSes at the bottom of the rack and the all metal construction makes sure they won't warp under heat.

I do wish the power cord was a bit thicker, but for the price, I was happy enough to purchase another one. BONUS: You can flip those ears around so that you can screw it in flush, good for most installations that are not in an equipment rack. Just be careful to make sure the ground terminal is still connected on one side, and that the wires on the other side dont get twisted.

I purchased this because it has a long power cord. This was useful for me. It is good quality to price ratio. The plugs fit in the sockets nice and tight. All in all... this was a good purchase.

EDIT: Customer service did reach out to me and offered to replace the faulty unit free of charge. I asked them how I should go about sending the faulty one back and they said no need. They were very kind and made sure that I am not inconvenienced in any way. So, if you do order one and something is wrong, they will take care of you and they do all the work. A minor setback on my end but they made sure to make things right. Outstanding. I am happy with how everything was handled and I can tell you that you don't need to worry about receiving a bad product if you buy this. If something is wrong, just write a review like I did and they will make things right. One plug likes to stop working randomly and it makes sparking noises when something is plugged in to it. I just don't use that plug. It scares me when it crackles. It's the bottom middle one in the first picture. However, I have bought two of these and the first one works fine. I'm writing this review in hopes that the owner or manufacturer or whoever is in charge of selling these reaches out to me. I would return it but I need it at the moment. Maybe an error at the manufacturing place and somebody failed to make a safe and secure connection on some type of electrical component? Poor quality materials maybe? Maybe just a random mishap on this one? Either way, it's a little inconvenient as I'm using almost all of my plugs and will most likely be using more plugs in the future. Might look around at other options when I expand and need to buy another one. If customer service makes this right I would do business with them again.

Works great. I can't fit anything else in my rack and I still have a few open spaces . I like the on off switch . It doesn't take up much space.

Not a very good power bar and poorly designed. The power cord on this power bar comes of the side instead of the back or front making it difficult to install it in a standard 19” rack. The cord gets squeezed between the rack rails and bar itself. The power switch is too close to the first outlet making it difficult to turn on and off the power bar. It is a very poorly designed and not worth the money.

funciona bien en mi rack a 110v

Cumple su función y se puede acoplar bien al Rack ya que se pueden girar las lengüetas, aunque la tornillería que lo ensambla es algo frágil. Por otro lado el cable de extensión es bastante largo, tal cual como la foto.

Works like a power strip. Wouldnt plug in heavy load but its solid & does its job. kinda flimsy outer mounting but dont tighten too tight

Works great in my rack. Simple just plug in and go.